![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：威海校区/千佛山校区机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 联系方式：邮箱 melius@sdu.edu.cn
QQ 834534349
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[81]
赵金富.
Measurement of temperature-dependent thermal conductivity for PVD Ti0.55Al0.45N ceramic coating by t.
Ceramics International,
8123,
2019.
-
[82]
赵金富.
PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in or.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,
2020.
-
[83]
赵金富.
Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiA.
Journal of manufacturing processes,
2020.
-
[84]
刘为向.
Saturation-Tolerant Predefined Space-Time Super Twisting Control and Its Application to Piezoelectri.
《IEEE-ASME TRANSACTIONS ON MECHATRONICS》,
2023.
-
[85]
.
On scheduled space-time convergence: sliding mode control through the scheduled time function.
International Journal of Control, Automation and Systems,
2023.
-
[86]
郭中义.
Design and analysis of a compliant microgripper with a large amplification ratio.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS,
2023.
-
[87]
孙雨彤.
A Novel Rate-Dependent Direct Inverse Preisach Model with Input Iteration for Hysteresis Compensatio.
International Journal of Control, Automation, and Systems,
2023.
-
[88]
陈庆辉.
Mechanism of laser-chemical process to remove of oxide layer and formation of periodic microstructu.
SURFACES AND INTERFACES,
2022.
-
[89]
唐一平.
Fabrication of superhydrophobic stainless steel via hybrid femtosecond laser-chemical method with w.
Optics and Laser Technology,
2023.
-
[90]
陈庆辉.
Periodically oriented superhydrophobic microstructures prepared by laser ablation-chemical etching .
Applied surface science,
2023.
-
[91]
王兵.
Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during .
Journal of Manufacturing Processes,
123,
2023.
-
[92]
王红.
Microstructure and mechanical properties of NiTi nanoporous structures fabricated with dealloying pr.
JOURNAL OF ALLOYS AND COMPOUNDS ,
2023.
-
[93]
卢业忠.
An early chatter detection method based on multivariate variational mode decomposition and chatter c.
《IEEE-ASME TRANSACTIONS ON MECHATRONICS》,
2022.
-
[94]
肖志新.
Real-Time milling tool breakage monitoring based on multiscale standard deviation diversity entropy.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal,
2023.
-
[95]
马海峰.
Predefined-Time Barrier Function Adaptive Sliding-Mode Control and Its Application to Piezoelectric .
IEEE Transactions on Industrial Informatics ,
2022.
-
[96]
王兵.
A rate-dependent damage model to characterize dynamic fracture behavior of Ti6Al4V under high strain.
Engineering fracture mechanics,
274,
108781,
2022.
-
[97]
解振威.
Optimizing amplitude to improve machined surface quality in longitudinal ultrasonic vibration-assist.
composite structures,
297,
115963,
2022.
-
[98]
Su, Guosheng.
Wear Characteristics of Cutting Tool in Brittle Removal of a Ductile Meta in High-Speed Machining.
SYMMETRY-BASEL,
13,
2021.
-
[99]
赵有乐.
Multi-scale modeling method for polycrystalline materials considering grain boundary misorientation .
Materials and design,
221,
2022.
-
[100]
冀寒松.
Evaluation and prediction of pore effects on single-crystal mechanical and damage properties of sele.
Materials and design,
219,
2022.
