![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[1]
杜宜聪.
Influence of strain rate-dependent grain boundary on mechanical property and machinability of IN718 .
Machining Science and Technology,
2025.
-
[2]
张陆杰.
HAMA/GelMA-based hydrogel microneedle patch via DLP 3D bioprinting for high-efficiency ISF extractio.
INTERNATIONAL JOURNAL OF PHARMACEUTICS,
680,
2025.
-
[3]
陈杰.
Finite-frequency dynamic outputtime delay feedback control for chatter mitigation in turning.
international Journal of Advanced Manufacturing Technology,
2025.
-
[4]
孙鑫鹏.
Quantitative analysis of milling chatter severity based on image-signal multi-modal data fusion.
Journal of manufacturing processes,
2025.
-
[5]
房晓辉.
An intelligent tool wear monitoring model based on knowledge-data-driven physical-informed neural ne.
Mechanical Systems and Signal Processing,
232,
2025.
-
[6]
Zhang, Chuanqi.
Investigation of Surface Integrity of Conical Hole in Laser Polishing 440C Stainless Steel.
METALS,
14,
2024.
-
[7]
李文倩.
干气密封动环表面的螺旋槽纳秒激光制备研究.
《中国机械工程(增刊)》,
2024.
-
[8]
Puthanveettil Madathil, Abhilash.
Intrinsic and post-hoc XAI approaches for fingerprint identification and response prediction in smar.
JOURNAL OF INTELLIGENT MANUFACTURING,
2024.
-
[9]
Liu, Annan.
Chip breakage assisted by pulsed high-pressure jet during continuous cylindrical turning 42CrMo stee.
Journal of manufacturing processes,
126,
245-251,
2024.
-
[10]
Ma, Kai.
How does the uncut chip thickness affect the deformation states within the primary shear zone during.
International Journal of Machine Tools & Manufacture,
199,
2024.
-
[11]
王超.
Investigation on multi-pulse femtosecond laser scribing of copper: Analysis of ablation grooves deve.
Materials and design,
241,
2024.
-
[12]
Wang, Xin.
Synthesis of Cu2O Nanoparticles by Ellipse Curve Micromixer.
ACS Omega,
8,
29758-29769,
2023.
-
[13]
蔡玉奎.
Enhancement of tribological performance with Laser surface texturing: A review.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY,
4,
2024.
-
[14]
赵祥洋.
Bauschinger effect in nano-grinding of 3C-SiC: A molecular dynamics study.
wear,
2025.
-
[15]
赵金富.
Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compa.
METALS,
14,
2024.
-
[16]
李坤於.
An interpretable thread quality classification model for real-time inspection of tapping process.
测量,
245,
2025.
-
[17]
房晓辉.
Intelligent monitoring system for production lines in smart factories: A hybrid method integrating T.
JOURNAL OF MANUFACTURING SYSTEMS,
79,
27-47,
2025.
-
[18]
李振民.
Self-sensing sliding mode control of workpiece chatter based on accurate prediction of machining vib.
Journal of Sound and Vibration,
600,
2025.
-
[19]
秦靖.
A task-cooperative drilling monitoring method based on heterogeneous multi-task learning: Task adapt.
Mechanical Systems and Signal Processing,
225,
2025.
-
[20]
彭业振.
Toward high-performance machining of thin-walled parts: Fusion of parallel spatial-temporal informat.
Measurement,
248,
2025.
