![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：威海校区/千佛山校区机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 联系方式：邮箱 melius@sdu.edu.cn
QQ 834534349
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[121]
赵金富.
Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiA.
Journal of manufacturing processes,
56,
2020.
-
[122]
赵金富.
One-Dimensional Heat Conduction Inverse Modelling of Heat Flux Generated at Tool- Chip Interface in .
IEEE ACCESS,
7,
95228,
2019.
-
[123]
赵金富.
Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN.
Tribology International.,
171,
2022.
-
[124]
赵金富.
Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with.
JOURNAL OF ADVANCED RESEARCH,
38,
191,
2021.
-
[125]
赵金富.
Measurement of temperature-dependent thermal conductivity for PVD Ti0.55Al0.45N ceramic coating by t.
Ceramics International,
45,
8123,
2019.
-
[126]
朱平忠.
Effects of Sequential Operation with Heat Treatment and Mechanical Milling on Work Hardening for Sup.
METALS,
11,
2021.
-
[127]
张世波.
Phase transition and dynamic recrystallization mechanisms of white layer formation during turning su.
Journal of Materials Research and Technology,
15,
5288,
2021.
-
[128]
王鑫.
Vortices degradation and periodical variation in spiral micromixers with various spiral structures.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,
183,
2022.
-
[129]
赵金富.
Tool coating effects on cutting temperature during metal cutting processes: Comprehensive review and.
Mechanical Systems and Signal Processing,
150,
2021.
-
[130]
王情情.
Visco-plastic self-consistent modeling of crystallographic texture evolution related to slip systems.
JOURNAL OF ALLOYS AND COMPOUNDS ,
853,
2021.
-
[131]
李国英.
Intermetallic compounds Cr3Te4/NiNbTe2 formation during infiltrating Te into Inconel 718.
MATERIALS LETTERS Journal,
310,
2022.
-
[132]
姚共厚.
Numerical prediction and experimental investigation of residual stresses in sequential milling of GH.
international Journal of Advanced Manufacturing Technology,
119,
7215,
2022.
-
[133]
殷庆安.
Heat transfer enhancement with surface-active thermal conductive media coating during orthogonal cut.
international Journal of Advanced Manufacturing Technology,
2022.
-
[134]
Kundu, Pradeep.
A machine learning-based framework for automatic identification of process and product fingerprints .
Journal of Manufacturing Processes,
73,
128,
2022.
-
[135]
解振威.
Longitudinal amplitude effect on material removal mechanism of ultrasonic vibration-assisted milling.
Ceramics International,
47,
32144,
2021.
-
[136]
刘凯.
Effects of the inclination angles of DLC end face micro-texture on the tribological properties of dr.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES,
9,
2021.
-
[137]
梁晓亮.
Prediction of residual stress with multi-physics model for orthogonal cutting Ti-6Al-4V under variou.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Journal,
288,
2021.
-
[138]
张志成.
The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-A.
MATERIALS,
15,
2022.
-
[139]
胡健睿.
Theoretical Modeling and Analysis of Directional Spectrum Emissivity and Its Pattern for Random Roug.
SYMMETRY-BASEL,
13,
2021.
-
[140]
王宏卫.
Multiscale design and biomechanical evaluation of porous spinal fusion cage to realize specified mec.
BIO-DESIGN AND MANUFACTURING,
5,
277,
2022.
