![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：威海校区/千佛山校区机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 联系方式：邮箱 melius@sdu.edu.cn
QQ 834534349
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[161]
马海峰.
Saturated adaptive barrier sliding mode control with state-dependent uncertainty limit.
IET Contorl Theory and Applications,
15,
1762,
2021.
-
[162]
马海峰.
Disturbance estimator-based switching function for discrete-time sliding mode control systems with c.
Transactions of the Institute of Measurement and Control,
43,
2715,
2021.
-
[163]
陈龙.
Graphene Nanoarchitectonics: A New Material Horizon for Reinforcement of Sustainable Polymers.
Frontiers in Materials,
7,
2020.
-
[164]
陈龙.
Microstructure simulation and heat transfer optimization for graphene oxide doped anti-/deicing comp.
Composites Science and Technology,
213,
2021.
-
[165]
陈龙.
Mathematical modeling of heat transfer in GO-doped reinforce polymer for anti-/deicing of wind turbi.
International Communications in Heat and Mass Transfer,
123,
2021.
-
[166]
任小平.
Effects of Machined Surface Integrity on High-Temperature Low-Cycle Fatigue Life and Process Paramet.
MATERIALS,
14,
2021.
-
[167]
姜佳明.
Formation mechanism of tearing defects in machining Nomex honeycomb core.
international Journal of Advanced Manufacturing Technology,
112,
3167,
2021.
-
[168]
李国英.
Effect of element Te on alterations of microstructure and mechanical property of nickel-based supera.
Applied Surface Science,
544,
2021.
-
[169]
Liu, Yang.
Stochastic Cutting Force Modeling and Prediction in Machining.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,
142,
2020.
-
[170]
柳月.
Optimisation of Planning Parameters for Machining Blade Electrode Micro-Fillet with Scallop Height M.
MICROMACHINES,
12,
2021.
-
[171]
王鑫.
A cost-effective serpentine micromixer utilizing ellipse curve.
ANALYTICA CHIMICA ACTA Journal,
1155,
2021.
-
[172]
马海峰.
Saturated adaptive barrier sliding mode control with state-dependent uncertainty limit.
IET Control Theory & Applications,
2021.
-
[173]
刘战强.
Milling of Ti–6Al–4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface q.
The International Journal of Advanced Manufacturing Technology,
2020.
-
[174]
牛佳慧.
A comprehensive method for selecting cutting tool materials.
international Journal of Advanced Manufacturing Technology,
110,
229,
2020.
-
[175]
Su, Guosheng.
On cutting temperatures in high and ultrahigh-speed machining.
international Journal of Advanced Manufacturing Technology,
107,
73,
2020.
-
[176]
刘战强.
商用车挡泥板总成失效分析与试验规范制定.
《工程设计学报》,
2020.
-
[177]
刘国梁.
The modification of corrosion resistance of 17-4PH stainless steel by cutting process.
Journal of Manufacturing Processes,
49,
447,
2020.
-
[178]
赵文明.
整体叶盘铣削数控编程与加工技术.
航空制造技术,
58,
2017.
-
[179]
王宏卫.
Biomechanical analysis of combination Ti/PEEK fusion cage designed with topology optimization.
International Journal of Applied Electromagnetics and Mechanics,
64,
1245,
2020.
-
[180]
马海峰.
Disturbance estimator based switching function for DSMC systems with control saturation.
Transactions of the Institute of Measurement and Control,
2021.
