Paper Publications
-
[1] 肖志新. A novel cross-domain tool breakage monitoring method based on locality preserving joint transfer .... Journal of manufacturing processes, 2024.
-
[2] 韩高威. Model-Free Finite Frequency H∞ Control for Active Chatter Suppression in Turning. Journal of Sound and Vibration, 2024.
-
[3] Ranjan, Jitesh. Artificial Intelligence-Based Hole Quality Prediction in Micro-Drilling Using Multiple Sensors. Sensors, 20, 2020.
-
[4] 赵金富. Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoate.... MICROMACHINES, 1263, 2023.
-
[5] Singh, Tejinder Pal. Abrasive Wear Behavior of Cryogenically Treated Boron Steel (30MnCrB4) Used for Rotavator Blades. MATERIALS, 13, 2020.
-
[6] Khanna, Navneet. Sustainability and machinability improvement of Nimonic-90 using indigenously developed green hyb.... Journal of Cleaner Production, 263, 2020.
-
[7] Sahoo, Priyabrata. Influences of TiAlN coating and limiting angles of flutes on prediction of cutting forces and dyn.... JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Journal, 278, 2020.
-
[8] Jamil, Muhammad. Milling of Ti-6Al-4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface .... international Journal of Advanced Manufacturing Technology, 107, 4141, 2020.
-
[9] Jamil, Muhammad. Comprehensive analysis on orthopedic drilling: A state-of-the-art review. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 234, 537, 2020.
-
[10] Singla, Anil Kumar. Impact of Cryogenic Treatment on HCF and FCP Performance of beta-Solution Treated Ti-6Al-4V ELI B.... MATERIALS, 13, 2020.
-
[11] Khanna, Navneet. Optimization of Power Consumption Associated with Surface Roughness in Ultrasonic Assisted Turnin.... MATERIALS, 12, 2019.
-
[12] 王冬琦. Cutting characteristics of porcine tenderloin tissue along tangential direction of surface. international Journal of Advanced Manufacturing Technology, 98, 17, 2018.
-
[13] 石佳昊. On the segmentation-driven vibration in milling titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engine, 34, 1508, 2018.
-
[14] 彭业振. A tool wear condition monitoring method for non-specific sensing signals. 国际机械科学, 2023.
-
[15] 冀寒松. Episodes of single-crystal material removal mode and machinability in the micro-cutting process o.... Journal of Materials Research and Technology, 24, 2074-2085, 2023.
-
[16] 曹诚. Fiber orientation effects on grinding characteristics and removal mechanism of 2.5D Cf/SiC compos.... CHINESE JOURNAL OF AERONAUTICS, 2023.
-
[17] 付辉. Automatic detection and pixel-level quantification of surface microcracks in ceramics grinding: A.... 测量, 224, 2024.
-
[18] 王小娟. Dynamic analysis and surface morphology prediction for deep cavity turning of bent-blade cutter. international Journal of Advanced Manufacturing Technology, 129, 4435-4455, 2023.
-
[19] 李振民. Chatter suppression mechanism and parameters configuration of the spindle speed variation with pi.... international Journal of Advanced Manufacturing Technology, 122, 3041-3055, 2022.
-
[20] 彭业振. Intelligent recognition of tool wear in milling based on a single sensor signal. international Journal of Advanced Manufacturing Technology, 124, 1077-1093, 2022.