sunjie 山东大学主页平台管理系统--Home

Paper Publications

Home >> Scientific Resear... >> Paper Publication...

[181] sunjie and 孙杰. 整体式立铣刀刃磨仿真技术研究现状与发展趋势. 机械工程学报, 2014.
[182] sunjie and 孙杰. Modeling and Analysis of Helical Groove Grinding in End Mill Machining. Journal of Materials Processing Technology, 2014.
[183] sunjie and 孙杰. Modeling and analysis for clearance machining process of end mills. Journal of Advanced Manufacturing Technology, 2014.
[184] sunjie and 孙杰. An Experimental Investigation of tool geometry on Residual Stresses in High-Speed End Milling 705.... Advances in Mechanical Engineering, 2013.
[185] sunjie and 孙杰. 整体式立铣刀三维精确建模与软件实现. 计算机辅助设计与图形学学报》, 2014.
[186] sunjie and 孙杰. Effect of rare earth oxide on the properties of laser cladding layer and machining vibration supp.... Applied Surface Science, 2014.
[187] sunjie , Li Jianfeng and 孙杰. Study on the tribological properties between the aluminum alloy 7050-T7451 and the YG8 cemented c.... journal of materials science, 46, 723, 2010.
[188] huangpanling , Li Jianfeng , sunjie and zhoujun. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.
[189] huangpanling , Li Jianfeng , sunjie and zhoujun. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.
[190] sunjie , Li Jianfeng and 孙杰. Influences of cutting path about machining performance in manufacturing titanium alloys Ti6Al4V t.... Advanced Materials research, 566, 222, 2012.
[191] huangpanling , Li Jianfeng and sunjie. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End.... Key Engineering Materials, 443, 285, 2010.
[192] Jia Xiujie , sunjie and Li Jianfeng. 立铣刀高速加工铝合金铣削力试验研究. 《组合机床与自动化加工技术》, 0, 71, 2007.
[193] Jia Xiujie , Li Jianfeng and sunjie. 铝合金高速铣削过程切屑成形机制研究. 轻合金加工技术, 37, 52, 2009.
[194] huangpanling , Li Jianfeng and sunjie. Structure optimization of variable pitch helix end mills based on FEM simulation. Key Engineering Materials, 443, 291, 2010.
[195] Jia Xiujie , Li Jianfeng and sunjie. 刀具钝化对切削力及表面粗糙度的影响. 《计算机集成制造系统》, 17, 1430, 2011.
[196] huangpanling , Li Jianfeng and sunjie. Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle .... international Journal of Advanced Manufacturing Technology, 0, 1, 2012.
[197] sunjie , Li Jianfeng , Jia Xiujie and 孙杰. 聚酯人造花岗岩复合材料的研制及工程应用. 《制造技术与机床》, 0, 85, 2006.
[198] sunjie , Li Jianfeng , Jia Xiujie and 孙杰. 硬质合金立铣刀高速铣削铝合金切屑形成机理研究. 41, 20, 2007.
[199] sunjie , Li Jianfeng and 孙杰. 石蜡辅助加固钛合金薄壁件铣削稳定性研究. 山东大学学报（工学版）, 0, 2011.
[200] sunjie and 孙杰. A Comprehensive Study on Surface Integrity by End Milling Ti-6Al-4V. Journal of Materials Processing Technology, 0, 4036, 2009.

total293 10/15

first previous next last Page

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[181] sunjie and 孙杰. 整体式立铣刀刃磨仿真技术研究现状与发展趋势. 机械工程学报, 2014.

[182] sunjie and 孙杰. Modeling and Analysis of Helical Groove Grinding in End Mill Machining. Journal of Materials Processing Technology, 2014.

[183] sunjie and 孙杰. Modeling and analysis for clearance machining process of end mills. Journal of Advanced Manufacturing Technology, 2014.

[184] sunjie and 孙杰. An Experimental Investigation of tool geometry on Residual Stresses in High-Speed End Milling 705.... Advances in Mechanical Engineering, 2013.

[185] sunjie and 孙杰. 整体式立铣刀三维精确建模与软件实现. 计算机辅助设计与图形学学报》, 2014.

[186] sunjie and 孙杰. Effect of rare earth oxide on the properties of laser cladding layer and machining vibration supp.... Applied Surface Science, 2014.

[187] sunjie , Li Jianfeng and 孙杰. Study on the tribological properties between the aluminum alloy 7050-T7451 and the YG8 cemented c.... journal of materials science, 46, 723, 2010.

[188] huangpanling , Li Jianfeng , sunjie and zhoujun. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.

[189] huangpanling , Li Jianfeng , sunjie and zhoujun. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.

[190] sunjie , Li Jianfeng and 孙杰. Influences of cutting path about machining performance in manufacturing titanium alloys Ti6Al4V t.... Advanced Materials research, 566, 222, 2012.

[191] huangpanling , Li Jianfeng and sunjie. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End.... Key Engineering Materials, 443, 285, 2010.

[192] Jia Xiujie , sunjie and Li Jianfeng. 立铣刀高速加工铝合金铣削力试验研究. 《组合机床与自动化加工技术》, 0, 71, 2007.

[193] Jia Xiujie , Li Jianfeng and sunjie. 铝合金高速铣削过程切屑成形机制研究. 轻合金加工技术, 37, 52, 2009.

[194] huangpanling , Li Jianfeng and sunjie. Structure optimization of variable pitch helix end mills based on FEM simulation. Key Engineering Materials, 443, 291, 2010.

[195] Jia Xiujie , Li Jianfeng and sunjie. 刀具钝化对切削力及表面粗糙度的影响. 《计算机集成制造系统》, 17, 1430, 2011.

[196] huangpanling , Li Jianfeng and sunjie. Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle .... international Journal of Advanced Manufacturing Technology, 0, 1, 2012.

[197] sunjie , Li Jianfeng , Jia Xiujie and 孙杰. 聚酯人造花岗岩复合材料的研制及工程应用. 《制造技术与机床》, 0, 85, 2006.

[198] sunjie , Li Jianfeng , Jia Xiujie and 孙杰. 硬质合金立铣刀高速铣削铝合金切屑形成机理研究. 41, 20, 2007.

[199] sunjie , Li Jianfeng and 孙杰. 石蜡辅助加固钛合金薄壁件铣削稳定性研究. 山东大学学报（工学版）, 0, 2011.

[200] sunjie and 孙杰. A Comprehensive Study on Surface Integrity by End Milling Ti-6Al-4V. Journal of Materials Processing Technology, 0, 4036, 2009.