sunjie 山东大学主页平台管理系统--Home

Paper Publications

Home >> Scientific Resear... >> Paper Publication...

[201] Li Jianfeng and sunjie. TC4铣削加工的刀具磨损与切削力和振动关系研究. 《兵工学报》, 36, 144, 2015.
[202] Li Jianfeng and sunjie. KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究. 机械工程学报, 51, 37, 2015.
[203] sunjie and 孙杰. Study on chip morphology and milling characteristics of laser cladding layer . international Journal of Advanced Manufacturing Technology, 2014.
[204] sunjie and 孙杰. Investigation on delamination morphology during drilling composite laminates. The International Journal of Advanced Manufacturing, 2014.
[205] sunjie and 孙杰. 整体式立铣刀刃磨仿真技术研究现状与发展趋势. 机械工程学报, 2014.
[206] sunjie and 孙杰. Modeling and Analysis of Helical Groove Grinding in End Mill Machining. Journal of Materials Processing Technology, 2014.
[207] sunjie and 孙杰. Modeling and analysis for clearance machining process of end mills. Journal of Advanced Manufacturing Technology, 2014.
[208] sunjie and 孙杰. An Experimental Investigation of tool geometry on Residual Stresses in High-Speed End Milling 705.... Advances in Mechanical Engineering, 2013.
[209] sunjie and 孙杰. 整体式立铣刀三维精确建模与软件实现. 计算机辅助设计与图形学学报》, 2014.
[210] sunjie and 孙杰. Effect of rare earth oxide on the properties of laser cladding layer and machining vibration supp.... Applied Surface Science, 2014.
[211] sunjie , Li Jianfeng and 孙杰. Study on the tribological properties between the aluminum alloy 7050-T7451 and the YG8 cemented c.... journal of materials science, 46, 723, 2010.
[212] huangpanling , Li Jianfeng , sunjie and zhoujun. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.
[213] huangpanling , Li Jianfeng , sunjie and zhoujun. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.
[214] sunjie , Li Jianfeng and 孙杰. Influences of cutting path about machining performance in manufacturing titanium alloys Ti6Al4V t.... Advanced Materials research, 566, 222, 2012.
[215] huangpanling , Li Jianfeng and sunjie. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End.... Key Engineering Materials, 443, 285, 2010.
[216] Jia Xiujie , sunjie and Li Jianfeng. 立铣刀高速加工铝合金铣削力试验研究. 《组合机床与自动化加工技术》, 0, 71, 2007.
[217] Jia Xiujie , Li Jianfeng and sunjie. 铝合金高速铣削过程切屑成形机制研究. 轻合金加工技术, 37, 52, 2009.
[218] huangpanling , Li Jianfeng and sunjie. Structure optimization of variable pitch helix end mills based on FEM simulation. Key Engineering Materials, 443, 291, 2010.
[219] Jia Xiujie , Li Jianfeng and sunjie. 刀具钝化对切削力及表面粗糙度的影响. 《计算机集成制造系统》, 17, 1430, 2011.
[220] huangpanling , Li Jianfeng and sunjie. Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle .... international Journal of Advanced Manufacturing Technology, 0, 1, 2012.

total317 11/16

first previous next last Page

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[201] Li Jianfeng and sunjie. TC4铣削加工的刀具磨损与切削力和振动关系研究. 《兵工学报》, 36, 144, 2015.

[202] Li Jianfeng and sunjie. KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究. 机械工程学报, 51, 37, 2015.

[203] sunjie and 孙杰. Study on chip morphology and milling characteristics of laser cladding layer . international Journal of Advanced Manufacturing Technology, 2014.

[204] sunjie and 孙杰. Investigation on delamination morphology during drilling composite laminates. The International Journal of Advanced Manufacturing, 2014.

[205] sunjie and 孙杰. 整体式立铣刀刃磨仿真技术研究现状与发展趋势. 机械工程学报, 2014.

[206] sunjie and 孙杰. Modeling and Analysis of Helical Groove Grinding in End Mill Machining. Journal of Materials Processing Technology, 2014.

[207] sunjie and 孙杰. Modeling and analysis for clearance machining process of end mills. Journal of Advanced Manufacturing Technology, 2014.

[208] sunjie and 孙杰. An Experimental Investigation of tool geometry on Residual Stresses in High-Speed End Milling 705.... Advances in Mechanical Engineering, 2013.

[209] sunjie and 孙杰. 整体式立铣刀三维精确建模与软件实现. 计算机辅助设计与图形学学报》, 2014.

[210] sunjie and 孙杰. Effect of rare earth oxide on the properties of laser cladding layer and machining vibration supp.... Applied Surface Science, 2014.

[211] sunjie , Li Jianfeng and 孙杰. Study on the tribological properties between the aluminum alloy 7050-T7451 and the YG8 cemented c.... journal of materials science, 46, 723, 2010.

[212] huangpanling , Li Jianfeng , sunjie and zhoujun. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.

[213] huangpanling , Li Jianfeng , sunjie and zhoujun. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.

[214] sunjie , Li Jianfeng and 孙杰. Influences of cutting path about machining performance in manufacturing titanium alloys Ti6Al4V t.... Advanced Materials research, 566, 222, 2012.

[215] huangpanling , Li Jianfeng and sunjie. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End.... Key Engineering Materials, 443, 285, 2010.

[216] Jia Xiujie , sunjie and Li Jianfeng. 立铣刀高速加工铝合金铣削力试验研究. 《组合机床与自动化加工技术》, 0, 71, 2007.

[217] Jia Xiujie , Li Jianfeng and sunjie. 铝合金高速铣削过程切屑成形机制研究. 轻合金加工技术, 37, 52, 2009.

[218] huangpanling , Li Jianfeng and sunjie. Structure optimization of variable pitch helix end mills based on FEM simulation. Key Engineering Materials, 443, 291, 2010.

[219] Jia Xiujie , Li Jianfeng and sunjie. 刀具钝化对切削力及表面粗糙度的影响. 《计算机集成制造系统》, 17, 1430, 2011.

[220] huangpanling , Li Jianfeng and sunjie. Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle .... international Journal of Advanced Manufacturing Technology, 0, 1, 2012.