sunjie 山东大学主页平台管理系统--Home

Paper Publications

Home >> Scientific Resear... >> Paper Publication...

[261] Li Jianfeng , sunjie and huangpanling. Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle .... international Journal of Advanced Manufacturing Technology, 0, 1, 2012.
[262] Li Jianfeng , sunjie and Jia Xiujie. 刀具钝化对切削力及表面粗糙度的影响. 《计算机集成制造系统》, 17, 1430, 2011.
[263] sunjie , Li Jianfeng and Jia Xiujie. 立铣刀高速加工铝合金铣削力试验研究. 《组合机床与自动化加工技术》, 0, 71, 2007.
[264] Li Jianfeng , sunjie and Jia Xiujie. Influence of cutting tool blade passivation on cutting force and surface roughness. Computer Integrated Manufacturing Systems, 2011,17, 1430, 2011.
[265] sunjie and Li Jianfeng. 纤维增强复合材料钻削分层的研磨检测. 航空制造技术, 73, 2015.
[266] sunjie and Li Jianfeng. TC4铣削加工的刀具磨损与切削力和振动关系研究. 《兵工学报》, 36, 144, 2015.
[267] sunjie and Li Jianfeng. KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究. 机械工程学报, 51, 37, 2015.
[268] sunjie and Li Jianfeng. 铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究. 《中国激光》, 42, 61, 2015.
[269] sunjie and Li Jianfeng. Experimental investigation of the effect of tool geometry on residual stresses in high speed end .... International Journal of Surface Science and Engineering, 9, 359, 2015.
[270] sunjie and Li Jianfeng. Finite element simulation and Experimental investigation on the residual stress related monolithi.... international Journal of Advanced Manufacturing Technology, 77, 1035, 2015.
[271] sunjie and Li Jianfeng. Effect of initial residual stress and machining induced residual stress on the deformation of alu.... SV-Journal of Mechanical Engineering, 61, 131, 2015.
[272] sunjie and Li Jianfeng. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials.... Materials Technology, 30, A46, 2015.
[273] sunjie and Li Jianfeng. Study on crack sensitivity and tribological characterisation of functionally gradient material mu.... International Journal of Surface Science and Engineering, 9, 370, 2015.
[274] sunjie and Li Jianfeng. An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbi.... International Journal of Machining and Machinability of Materials, 17, 319, 2015.
[275] sunjie and Li Jianfeng. Study on chip morphology and milling characteristics of laser cladding layer. international Journal of Advanced Manufacturing Technology, 77, 783, 2015.
[276] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Typ.... Journal of Cleaner Production, 67, 258, 2014.
[277] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.
[278] Li Jianfeng , sunjie , zhoujun and huangpanling. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.
[279] guokai , sunjie , Li Jianfeng and 朱兆聚. Evolution of 3D chip morphology and phase transformation in dry drilling Ti6Al4V alloys. Journal of manufacturing processes, 34, 531, 2018.
[280] Li Jianfeng , sunjie and 刘凯. Investigation on chip morphology and properties in drilling aluminum and titanium stack with doub.... Int J Adv Manuf Technol, 94, 1947, 2018.

total310 14/16

first previous next last Page

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[261] Li Jianfeng , sunjie and huangpanling. Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle .... international Journal of Advanced Manufacturing Technology, 0, 1, 2012.

[262] Li Jianfeng , sunjie and Jia Xiujie. 刀具钝化对切削力及表面粗糙度的影响. 《计算机集成制造系统》, 17, 1430, 2011.

[263] sunjie , Li Jianfeng and Jia Xiujie. 立铣刀高速加工铝合金铣削力试验研究. 《组合机床与自动化加工技术》, 0, 71, 2007.

[264] Li Jianfeng , sunjie and Jia Xiujie. Influence of cutting tool blade passivation on cutting force and surface roughness. Computer Integrated Manufacturing Systems, 2011,17, 1430, 2011.

[265] sunjie and Li Jianfeng. 纤维增强复合材料钻削分层的研磨检测. 航空制造技术, 73, 2015.

[266] sunjie and Li Jianfeng. TC4铣削加工的刀具磨损与切削力和振动关系研究. 《兵工学报》, 36, 144, 2015.

[267] sunjie and Li Jianfeng. KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究. 机械工程学报, 51, 37, 2015.

[268] sunjie and Li Jianfeng. 铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究. 《中国激光》, 42, 61, 2015.

[269] sunjie and Li Jianfeng. Experimental investigation of the effect of tool geometry on residual stresses in high speed end .... International Journal of Surface Science and Engineering, 9, 359, 2015.

[270] sunjie and Li Jianfeng. Finite element simulation and Experimental investigation on the residual stress related monolithi.... international Journal of Advanced Manufacturing Technology, 77, 1035, 2015.

[271] sunjie and Li Jianfeng. Effect of initial residual stress and machining induced residual stress on the deformation of alu.... SV-Journal of Mechanical Engineering, 61, 131, 2015.

[272] sunjie and Li Jianfeng. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials.... Materials Technology, 30, A46, 2015.

[273] sunjie and Li Jianfeng. Study on crack sensitivity and tribological characterisation of functionally gradient material mu.... International Journal of Surface Science and Engineering, 9, 370, 2015.

[274] sunjie and Li Jianfeng. An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbi.... International Journal of Machining and Machinability of Materials, 17, 319, 2015.

[275] sunjie and Li Jianfeng. Study on chip morphology and milling characteristics of laser cladding layer. international Journal of Advanced Manufacturing Technology, 77, 783, 2015.

[276] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Typ.... Journal of Cleaner Production, 67, 258, 2014.

[277] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.

[278] Li Jianfeng , sunjie , zhoujun and huangpanling. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.

[279] guokai , sunjie , Li Jianfeng and 朱兆聚. Evolution of 3D chip morphology and phase transformation in dry drilling Ti6Al4V alloys. Journal of manufacturing processes, 34, 531, 2018.

[280] Li Jianfeng , sunjie and 刘凯. Investigation on chip morphology and properties in drilling aluminum and titanium stack with doub.... Int J Adv Manuf Technol, 94, 1947, 2018.