Paper Publications
-
[61] 刘江伟. Understanding the effect of scanning strategies on the microstructure and crystallographic textur.... JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 117366, 2022.
-
[62] 昝卓良. Investigation of MQL parameters in milling of titanium alloy. international Journal of Advanced Manufacturing Technology, 116, 375, 2021.
-
[63] 许亚鹏. Design, modeling and control of a reconfigurable variable stiffness actuator. Mechanical Systems and Signal Processing, 160, 2021.
-
[64] 赵艳哲. Investigation on machinability of NiTi shape memory alloys under different cooling conditions. international Journal of Advanced Manufacturing Technology, 116, 1913, 2021.
-
[65] SAAD WAQAR. FEM analysis of thermal and residual stress profile in selective laser melting of 316L stainless .... Journal of Manufacturing Processes, 66, 81, 2021.
-
[66] 刘江伟. Compressive behavior and vibration-damping properties of porous Ti-6Al-4V alloy manufactured by l.... Journal of Manufacturing Processes, 66, 1, 2021.
-
[67] 国凯. Towards metamaterial rods with amplitude-dependent band gaps: A superelastic alloy-based approach. Mechanical Systems and Signal Processing, 2021.
-
[68] 许亚鹏. Design, modeling and control of a reconfigurable variable stiffness actuator. Mechanical Systems and Signal Processing, 160, 2021.
-
[69] 孙福来. Accurate measurement of CTE of aluminum alloy 7050-T7451 and the impact on thermal deformation an.... Advanced Materials research, 566, 476, 2012.
-
[70] 周军. Finite Element Analysis of Micro-Cutting Aluminum 7050-T7451 with the Tool Edge Radius Considered. Advanced Materials research, 2010.
-
[71] 王福增. Experiments and finite element simulations on micro-milling of aluminum alloy7050-T7451. Advanced Materials research, 500, 650, 2012.
-
[72] 苑荣华. Experimental Study on Surface Roughness and Residual Stress by End Milling 69111 Stainless Stell. Advanced Materials research, 97-101, 1257, 2010.
-
[73] 苑荣华. 69111铣削加工参数优化研究. 《工具技术》, 43, 18, 2009.
-
[74] 黄晓明. 7050--T7451铝合金预拉伸板材热膨胀系数变化规律及机理. 《中国有色金属学报》, 23, 3282, 2013.
-
[75] 李国超. Study on Establishment of Helix Flute Mathematic Model of Solid Carbide End Mills. Applied Mechanics and Materials, 2011.
-
[76] 孙杰. 残余应力对航空整体结构件加工变形的影响分析. 机械工程学报, 41, 118, 2005.
-
[77] 孙杰. Effect of initial residual stress and machining-induced residual stress on the deformation of alu.... SV-Journal of Mechanical Engineering, 2015.
-
[78] 孙杰. 高速列车车轴-轴承温度特性及弛缓机理. 山东大学学报(工学版), 2016.
-
[79] 朱兆聚. Investigation on the influence of tool wear upon chip morphology in end milling titanium alloy Ti.... international Journal of Advanced Manufacturing Technology, 2016.
-
[80] 孙玉晶. 钛合金铣削加工刀具磨损有限元预测分析. 机械工程学报, 2016.