sunjie 山东大学主页平台管理系统--Home

Paper Publications

Home >> Scientific Resear... >> Paper Publication...

[41] 王协彬. Effect of process parameters on the phase transformation behavior and tensile properties of NiTi .... Additive Manufacturing, 36, 101545, 2020.
[42] 高通. A high strength AlSi10Mg alloy fabricated by laser powder bed fusion with addition of Alsingle bo.... Materialia, 16, 101103, 2021.
[43] 朱兆聚. Investigation on performance characteristics and metallographic transformation on drilling alumin.... JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 21, 1578, 2019.
[44] 刘江伟. Understanding the effect of scanning strategies on the microstructure and crystallographic textur.... JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 117366, 2022.
[45] 昝卓良. Investigation of MQL parameters in milling of titanium alloy. international Journal of Advanced Manufacturing Technology, 116, 375, 2021.
[46] 许亚鹏. Design, modeling and control of a reconfigurable variable stiffness actuator. Mechanical Systems and Signal Processing, 160, 2021.
[47] 赵艳哲. Investigation on machinability of NiTi shape memory alloys under different cooling conditions. international Journal of Advanced Manufacturing Technology, 116, 1913, 2021.
[48] SAAD WAQAR. FEM analysis of thermal and residual stress profile in selective laser melting of 316L stainless .... Journal of Manufacturing Processes, 66, 81, 2021.
[49] 刘江伟. Compressive behavior and vibration-damping properties of porous Ti-6Al-4V alloy manufactured by l.... Journal of Manufacturing Processes, 66, 1, 2021.
[50] 国凯. Towards metamaterial rods with amplitude-dependent band gaps: A superelastic alloy-based approach. Mechanical Systems and Signal Processing, 2021.
[51] 许亚鹏. Design, modeling and control of a reconfigurable variable stiffness actuator. Mechanical Systems and Signal Processing, 160, 2021.
[52] 孙福来. Accurate measurement of CTE of aluminum alloy 7050-T7451 and the impact on thermal deformation an.... Advanced Materials research, 566, 476, 2012.
[53] 周军. Finite Element Analysis of Micro-Cutting Aluminum 7050-T7451 with the Tool Edge Radius Considered. Advanced Materials research, 2010.
[54] 王福增. Experiments and finite element simulations on micro-milling of aluminum alloy7050-T7451. Advanced Materials research, 500, 650, 2012.
[55] 苑荣华. Experimental Study on Surface Roughness and Residual Stress by End Milling 69111 Stainless Stell. Advanced Materials research, 97-101, 1257, 2010.
[56] 苑荣华. 69111铣削加工参数优化研究. 《工具技术》, 43, 18, 2009.
[57] 黄晓明. 7050--T7451铝合金预拉伸板材热膨胀系数变化规律及机理. 《中国有色金属学报》, 23, 3282, 2013.
[58] 李国超. Study on Establishment of Helix Flute Mathematic Model of Solid Carbide End Mills. Applied Mechanics and Materials, 2011.
[59] 孙杰. 残余应力对航空整体结构件加工变形的影响分析. 机械工程学报, 41, 118, 2005.
[60] 孙杰. Effect of initial residual stress and machining-induced residual stress on the deformation of alu.... SV-Journal of Mechanical Engineering, 2015.

total293 3/15

first previous next last Page

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[41] 王协彬. Effect of process parameters on the phase transformation behavior and tensile properties of NiTi .... Additive Manufacturing, 36, 101545, 2020.

[42] 高通. A high strength AlSi10Mg alloy fabricated by laser powder bed fusion with addition of Alsingle bo.... Materialia, 16, 101103, 2021.

[43] 朱兆聚. Investigation on performance characteristics and metallographic transformation on drilling alumin.... JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 21, 1578, 2019.

[44] 刘江伟. Understanding the effect of scanning strategies on the microstructure and crystallographic textur.... JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 117366, 2022.

[45] 昝卓良. Investigation of MQL parameters in milling of titanium alloy. international Journal of Advanced Manufacturing Technology, 116, 375, 2021.

[46] 许亚鹏. Design, modeling and control of a reconfigurable variable stiffness actuator. Mechanical Systems and Signal Processing, 160, 2021.

[47] 赵艳哲. Investigation on machinability of NiTi shape memory alloys under different cooling conditions. international Journal of Advanced Manufacturing Technology, 116, 1913, 2021.

[48] SAAD WAQAR. FEM analysis of thermal and residual stress profile in selective laser melting of 316L stainless .... Journal of Manufacturing Processes, 66, 81, 2021.

[49] 刘江伟. Compressive behavior and vibration-damping properties of porous Ti-6Al-4V alloy manufactured by l.... Journal of Manufacturing Processes, 66, 1, 2021.

[50] 国凯. Towards metamaterial rods with amplitude-dependent band gaps: A superelastic alloy-based approach. Mechanical Systems and Signal Processing, 2021.

[51] 许亚鹏. Design, modeling and control of a reconfigurable variable stiffness actuator. Mechanical Systems and Signal Processing, 160, 2021.

[52] 孙福来. Accurate measurement of CTE of aluminum alloy 7050-T7451 and the impact on thermal deformation an.... Advanced Materials research, 566, 476, 2012.

[53] 周军. Finite Element Analysis of Micro-Cutting Aluminum 7050-T7451 with the Tool Edge Radius Considered. Advanced Materials research, 2010.

[54] 王福增. Experiments and finite element simulations on micro-milling of aluminum alloy7050-T7451. Advanced Materials research, 500, 650, 2012.

[55] 苑荣华. Experimental Study on Surface Roughness and Residual Stress by End Milling 69111 Stainless Stell. Advanced Materials research, 97-101, 1257, 2010.

[56] 苑荣华. 69111铣削加工参数优化研究. 《工具技术》, 43, 18, 2009.

[57] 黄晓明. 7050--T7451铝合金预拉伸板材热膨胀系数变化规律及机理. 《中国有色金属学报》, 23, 3282, 2013.

[58] 李国超. Study on Establishment of Helix Flute Mathematic Model of Solid Carbide End Mills. Applied Mechanics and Materials, 2011.

[59] 孙杰. 残余应力对航空整体结构件加工变形的影响分析. 机械工程学报, 41, 118, 2005.

[60] 孙杰. Effect of initial residual stress and machining-induced residual stress on the deformation of alu.... SV-Journal of Mechanical Engineering, 2015.