孙杰山东大学主页平台管理系统--中文主页

更多

` 中文
- English

孙杰

职称：教授
所在单位：机械工程学院

教师拼音名称：sunjie
入职时间：2004-04-06
所在单位：机械工程学院
性别：男
在职信息：在职
是否在职：1

论文成果

[181] 孙杰 , 李燕乐 , 李剑峰 and 路来骁. A theoretical model for load prediction in rolling correction process of thin-walled aeronautic parts. international Journal of Advanced Manufacturing Technology, 92, 4121, 2017.
[182] 孙杰 , 李剑峰 , 李燕乐 and 朱兆聚. Investigation on performance characteristics in drilling of Ti6Al4V alloy. international Journal of Advanced Manufacturing Technology, 93, 651, 2017.
[183] 孙杰 and 刘春. 聚氨酯泡沫辅助加固钛合金薄壁件铣削性能研究. 航空制造技术, 93, 2017.
[184] 孙杰 , 李剑峰 and 黄晓明. 基于刚度与应力演变机制的航空整体结构件加工变形预测理论建模. 机械工程学报, 53, 201, 2017.
[185] 孙杰 and 路来骁. 基于能量理论的航空整体结构件滚压变形校正载荷预测方法. 《航空学报》, 38, 305, 2017.
[186] 孙杰 , 皇攀凌 and 侯秋林. 基于机器视觉刀具几何参数检测算法与误差分析. 山东大学学报（工学版）, 47, 77, 2017.
[187] 李剑峰 and 孙杰. Study on crack sensitivity and tribological characterisation of functionally gradient material multi-layer by laser cladding with powder mixture of Ni-based alloy and tungsten carbide. International Journal of Surface Science and Engineering, 9, 370, 2015.
[188] 李剑峰 and 孙杰. 纤维增强复合材料钻削分层的研磨检测. 航空制造技术, 73, 2015.
[189] 李剑峰 and 孙杰. Finite element simulation and Experimental investigation on the residual stress related monolithic component deformation.. international Journal of Advanced Manufacturing Technology, 77, 1035, 2015.
[190] 孙杰. Process modeling of end mill groove machining based on Boolean method. Journal of Advanced Manufacturing Technology, 2014.
[191] 孙杰. Approach for modeling accurate undeformed chip thickness. international Journal of Advanced Manufacturing Technology, 2013.
[192] 皇攀凌 , 李剑峰 , 孙杰 and 周军. Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Types of Tools. Journal of Cleaner Production, 67, 258, 2014.
[193] 李剑峰 and 孙杰. 铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究. 中国激光, 42, 61, 2015.
[194] 李剑峰 and 孙杰. Effect of initial residual stress and machining induced residual stress on the deformation of aluminium alloy plate. SV-Journal of Mechanical Engineering, 61, 131, 2015.
[195] 李剑峰 and 孙杰. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials Technology. Materials Technology, 30, A46, 2015.

共317条 13/22

首页上页下页尾页页

扫一扫用手机查看