孙杰山东大学主页平台管理系统--中文主页

更多

` 中文
- English

孙杰

职称：教授
所在单位：机械工程学院

教师拼音名称：sunjie
入职时间：2004-04-06
所在单位：机械工程学院
性别：男
在职信息：在职
是否在职：1

论文成果

[196] 孙杰. Study on chip morphology and milling characteristics of laser cladding layer . international Journal of Advanced Manufacturing Technology, 2014.
[197] 孙杰. Investigation on delamination morphology during drilling composite laminates. The International Journal of Advanced Manufacturing, 2014.
[198] 孙杰. 整体式立铣刀刃磨仿真技术研究现状与发展趋势. 机械工程学报, 2014.
[199] 孙杰. Modeling and Analysis of Helical Groove Grinding in End Mill Machining. Journal of Materials Processing Technology, 2014.
[200] 孙杰. Modeling and analysis for clearance machining process of end mills. Journal of Advanced Manufacturing Technology, 2014.
[201] 孙杰. An Experimental Investigation of tool geometry on Residual Stresses in High-Speed End Milling 7050-T7451 Aluminum Alloy. Advances in Mechanical Engineering, 2013.
[202] 孙杰. 整体式立铣刀三维精确建模与软件实现. 计算机辅助设计与图形学学报》, 2014.
[203] 孙杰. Effect of rare earth oxide on the properties of laser cladding layer and machining vibration suppressing in side milling. Applied Surface Science, 2014.
[204] 孙杰 and 李剑峰. Study on the tribological properties between the aluminum alloy 7050-T7451 and the YG8 cemented carbide. journal of materials science, 46, 723, 2010.
[205] 皇攀凌 , 李剑峰 , 孙杰 and 周军. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in milling titanium alloy. international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.
[206] 皇攀凌 , 李剑峰 , 孙杰 and 周军. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.
[207] 孙杰 and 李剑峰. Influences of cutting path about machining performance in manufacturing titanium alloys Ti6Al4V thin-walled components. Advanced Materials research, 566, 222, 2012.
[208] 皇攀凌 , 李剑峰 and 孙杰. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End Mills. Key Engineering Materials, 443, 285, 2010.
[209] 贾秀杰 , 孙杰 and 李剑峰. 立铣刀高速加工铝合金铣削力试验研究. 《组合机床与自动化加工技术》, 0, 71, 2007.
[210] 贾秀杰 , 李剑峰 and 孙杰. 铝合金高速铣削过程切屑成形机制研究. 轻合金加工技术, 37, 52, 2009.

共310条 14/21

首页上页下页尾页页

扫一扫用手机查看