Paper Publications
- [46] 柴佳龙. Microcellular injection molded lightweight and tough poly (L-lactic acid)/in-situ polytetrafluoroethylene nanocomposite foams with enhanced surface quality and thermally-insulating performance. International Journal of Biological Macromolecules, 215, 57-66, 2022.
- [47] 董桂伟. 高等工程教育虚拟仿真实验教学的分析与思考——基于278项国家级虚拟仿真实验教学项目的描述性研究. 实验技术与管理, 39, 1-7, 2022.
- [48] 王桂龙. 基于CAE的大型LCD注塑面板变模温设计与分析. 材料工程（Journal of Materials Engineering）, 24-28, 2009.
- [49] 王赛. Enhanced foaming ability of thermoplastic polyurethane by crystallization during mold-opening foam injection molding with supercritical N2as blowing agents. Journal of Materials Research and Technology, 22, 2489-2501, 2023.
- [50] Li, Wenli. Real-microcellular poly(ether-block-amide)/carbon fiber foams with improved mechanical property and surface quality for high-performance electromagnetic interference shielding applications. Journal of Materials Research and Technology, 26, 6508-6519, 2023.
- [51] Duan, Ningmin. Multilayer Ti3C2Tx MXene/graphene oxide/carbon fiber fabric/thermoplastic polyurethane composite for improved mechanical and electromagnetic interference shielding performance. Colloids and Surfaces A, 677, 2023.
- [52] Li, Bin. Bicontinuous, High-Strength, and Multifunctional Chemical-Cross-Linked MXene/Superaligned Carbon Nanotube Film.. ACS nano, 16, 19293-19304, 2022.
- [53] 王桂龙. Structure-gradient thermoplastic polyurethane foams with enhanced resilience derived by microcellular foaming. JOURNAL OF SUPERCRITICAL FLUIDS, 188, 2022.
- [54] 王桂龙. Steam-assisted rapid heat cycle molding and simulation of temperature response of the mold. 《高分子材料科学与工程》, 25, 171-174, 2009.
- [55] 王桂龙. Heat response simulation of variotherm injection molding and optimization of mold structure. 机械工程学报, 45, 216-221, 2009.
- [56] 王桂龙. Design and analysis of variotherm injection molding of large LCD panel based on CAE. 材料工程（Journal of Materials Engineering）, 24-28, 2009.
- [57] 王桂龙. Foaming behavior and control of polypropylene/nitrogen system in microcellular foam injection molding. 73rd Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Orlando 2015, 0, 1685-1691, 2015.
- [58] 董桂伟. Foaming Behavior Control and Cell Structure Modification of Microcellular Injection Molded Parts by High Pressure Packing and Mold Opening. 机械工程学报, 56, 35-42, 2020.
- [59] 董桂伟. Supercritical Fluid Assisted Microcellular Injection Molding and the Melt Foaming Behaviors. 机械工程学报, 54, 42-48, 2018.
- [60] 李博. Fabrication of high-expansion microcellular PLA foams based on pre-isothermal cold crystallization and supercritical CO2 foaming. Polymer Degradation and Stability, 156, 75-88, 2018.
| TOTAL 319 PIECE 4/22 |
- Gelon
Email:
Telephone:
PostalAddress:
ZipCode:
|
Copyright All Rights Reserved Shandong University Address: No. 27 Shanda South Road, Jinan City, Shandong Province, China: 250100 Information desk: (86) - 0531-88395114 On Duty Telephone: (86) - 0531-88364731 Construction and Maintenance: Information Work Office of Shandong University |
Click:
 MOBILE Version
The Last Update Time:.. |