![]()
邹斌
-
教授
- 性别：男
- 在职信息：在职
- 所在单位：机械工程学院
- 入职时间： 2008-07-01
访问量：
-
[61]
付祥松.
Edge micro-creation of Ti(C, N) cermet inserts by micro-abrasive blasting process and its tool perfo.
Machining Science and Technology,
23,
951,
2019.
-
[62]
王一顺.
Feasibility study of the Ti(C7N3)-based cermet micro-mill based on dynamic fatigue behavior and mode.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal,
155,
143,
2019.
-
[63]
邢宏宇.
Preparation and characterization of UV curable Al2O3 suspensions applying for stereolithography 3D p.
Powder technology,
338,
153,
2018.
-
[64]
张帅.
Edge passivation and quality of carbide cutting inserts treated by wet micro-abrasive blasting.
international Journal of Advanced Manufacturing Technology,
96,
2307,
2018.
-
[65]
李莎莎.
Machined channel quality and tool life using cermet micro-mill in micro-milling aluminum alloy.
international Journal of Advanced Manufacturing Technology,
101,
2205,
2019.
-
[66]
丁宏健.
Instantaneous milling force prediction and valuation of end milling based on friction angle in ortho.
international Journal of Advanced Manufacturing Technology,
116,
1341,
2021.
-
[67]
刘晓艳.
The preparation of ZrO2-Al2O3 composite ceramic by SLA-3D printing and sintering processing.
Ceramics International,
46,
937,
2020.
-
[68]
王一顺.
Effect of the progressive tool wear on surface topography and chip formation in micro-milling of Ti-.
Tribology International,
141,
2020.
-
[69]
陈清华.
3D printing and osteogenesis of loofah-like hydroxyapatite bone scaffolds.
Ceramics International,
47,
20352,
2021.
-
[70]
邢宏宇.
Fabrication and characterization of SiC whiskers toughened Al2O3 paste for stereolithography 3D prin.
JOURNAL OF ALLOYS AND COMPOUNDS ,
828,
2020.
-
[71]
陈伟.
A study of a rapid method for detecting the machined surface roughness.
international Journal of Advanced Manufacturing Technology,
2021.
-
[72]
王鹏.
Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/ PEEK and GF.
航空学报（英文版）,
34,
236,
2021.
-
[73]
云昊.
Assessment of cyclic utilization of coated cemented carbide inserts for turning of Inconel 718.
international Journal of Advanced Manufacturing Technology,
112,
1583,
2021.
-
[74]
云昊.
Design and fabrication of graded cBN tool materials through high temperature high pressure method.
JOURNAL OF ALLOYS AND COMPOUNDS ,
832,
2020.
-
[75]
邢宏宇.
Original Fabrication strategy of complicated Al2O3-Si3N4 functionally graded materials by stereolith.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY Journal,
40,
5797,
2020.
-
[76]
陈清华.
A study on biosafety of HAP ceramic prepared by SLA-3D printing technology directly.
Journal of the Mechanical Behavior of Biomedical Materials,
98,
327,
2019.
-
[77]
邢宏宇.
Effect of particle size distribution on the preparation of ZTA ceramic paste applying for stereolith.
POWDER TECHNOLOGY Journal,
359,
314,
2020.
-
[78]
李轶尚.
Wear patterns and mechanisms of sialon ceramic end-milling tool during high speed machining of nicke.
Ceramics International,
47,
5690,
2021.
-
[79]
王俊成.
Milling force prediction model based on transfer learning and neural network.
JOURNAL OF INTELLIGENT MANUFACTURING,
2021.
-
[80]
吴悠.
Molecular dynamics study on friction property between fused silica and SiC mold in high temperature .
Materials Today Communications,
26,
2021.
