蔡玉奎
-
教授
博士生导师
硕士生导师
- 性别:男
- 毕业院校:英国思克莱德大学
- 学历:研究生(博士)毕业
- 学位:博士生
- 在职信息:在职
- 所在单位:机械工程学院
- 入职时间: 2019-09-01
- 联系方式:caiyukui@sdu.edu.cn
- 电子邮箱:caiyukui@sdu.edu.cn
访问量:
-
[1]
赵金富.
Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated a.
MICROMACHINES,
1263,
2023.
-
[2]
李振民.
Chatter suppression mechanism and parameters configuration of the spindle speed variation with piece.
international Journal of Advanced Manufacturing Technology,
122,
3041-3055,
2022.
-
[3]
李振民.
Response prediction of cantilever plates via mode superposition method and combination method of bea.
Mechanical Systems and Signal Processing,
200,
2023.
-
[4]
王腾.
Construction of a bioactive surface with micro/nano-topography on titanium alloy by micro-milling an.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE,
2016.
-
[5]
万熠.
Osteogenic and antibacterial ability of micro-nano structures coated with ZnO on Ti-6Al-4V implant .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,
2022.
-
[6]
赵梓贺.
Biocompability evaluation of micro textures coated with zinc oxide on Ti-6Al-4V treated by nanosecon.
Surface& Coatings Technology,
422,
2021.
-
[7]
赵梓贺.
Biocompability evaluation of micro textures coated with zinc oxide on Ti-6Al-4V treated by nanosecon.
Surface& Coatings Technology,
422,
2021.
-
[8]
赵金富.
A comprehensive review of generating, monitoring, evaluating, and controlling particle emissions du.
JOURNAL OF MANUFACTURING SYSTEMS,
2023.
-
[9]
赵金富.
Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with.
JOURNAL OF ADVANCED RESEARCH,
2022.
-
[10]
陈庆辉.
Mechanism of laser-chemical process to remove of oxide layer and formation of periodic microstructu.
SURFACES AND INTERFACES,
2022.
-
[11]
唐一平.
Fabrication of superhydrophobic stainless steel via hybrid femtosecond laser-chemical method with w.
Optics and Laser Technology,
2023.
-
[12]
陈庆辉.
Periodically oriented superhydrophobic microstructures prepared by laser ablation-chemical etching .
Applied Surface Science,
2023.
-
[13]
王兵.
Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during .
Journal of Manufacturing Processes,
123,
2023.
-
[14]
解振威.
Optimizing amplitude to improve machined surface quality in longitudinal ultrasonic vibration-assist.
composite structures,
297,
115963,
2022.
-
[15]
赵有乐.
Multi-scale modeling method for polycrystalline materials considering grain boundary misorientation .
Materials and design,
221,
2022.
-
[16]
赵金富.
Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with.
JOURNAL OF ADVANCED RESEARCH,
38,
191,
2021.
-
[17]
王鑫.
Vortices degradation and periodical variation in spiral micromixers with various spiral structures.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,
183,
2022.
-
[18]
姚共厚.
Numerical prediction and experimental investigation of residual stresses in sequential milling of GH.
international Journal of Advanced Manufacturing Technology,
119,
7215,
2022.
-
[19]
殷庆安.
Heat transfer enhancement with surface-active thermal conductive media coating during orthogonal cut.
international Journal of Advanced Manufacturing Technology,
2022.
-
[20]
Kundu, Pradeep.
A machine learning-based framework for automatic identification of process and product fingerprints .
Journal of Manufacturing Processes,
73,
128,
2022.