教授
性别:男
在职信息:在职
所在单位:机械工程学院
入职时间:1990-07-01
访问量:
最后更新时间:..
-
[41]
王冉.
Preparation and infrared properties of Ni3Al–Cr3C2 composite films deposited by electrohydrodynamic atomization technology.
Materials Chemistry and Physics,
278,
2022.
-
[42]
Li, Yan.
Surface textures on cemented carbide cutting tools by micro EDM assisted with high-frequency vibration.
international Journal of Advanced Manufacturing Technology,
82,
2157-2165,
2016.
-
[43]
Liu, Yayun.
Effect of texture parameters on cutting performance of flank-faced textured carbide tools in dry cutting of green Al2O3 ceramics.
Ceramics International,
44,
13205-13217,
2018.
-
[44]
Li, Xuemu.
Tribological properties of WS2 coatings deposited on textured surfaces by electrohydrodynamic atomization.
Surface & Coatings Technology,
352,
128-143,
2018.
-
[45]
Zhang, Kedong.
Study on the adhesion and tribological behavior of PVD TiA1N coatings with a multi-scale textured substrate surface.
International Journal of Refractory Metals & Hard Materials,
72,
292-305,
2018.
-
[46]
Duan, Ran.
An approach to predict derivative-chip formation in derivative cutting of micro-textured tools.
international Journal of Advanced Manufacturing Technology,
95,
973-982,
2018.
-
[47]
吴佳星.
The tribological properties and corrosion resistance of PPS/PTFE-bronze coatings deposited by electrohydrodynamic jet deposition.
Surface& Coatings Technology,
436,
2022.
-
[48]
王冉.
<p>Preparation and infrared properties of Ni3Al-Cr3C2 composite films deposited by electrohydrodynamic atomization technology</p>.
MATERIALS CHEMISTRY AND PHYSICS Journal,
278,
2022.
-
[49]
鲁洋.
Tribological performance of micro textured surface machined by Nd:YAG laser with different incident angle.
Optics and Laser Technology,
148,
2022.
-
[50]
吴佳星.
Tribological properties of PTFE/PPS films deposited on the ultrasonic rolling textured substrates by electrohydrodynamic atomization under dry reciprocating sliding.
wear,
488-489,
2022.
-
[51]
王冉.
Microstructure and tribological properties of Ni3Al-Cr3C2/Ni3Al micro-laminate composite films fabricated by electrohydrodynamic atomization technique.
VACUUM,
200,
2022.
-
[52]
王冉.
Microstructure and wear performance of electro-sprayed self-lubricating Ni3Al/Cr3C2-MoS2 composite films.
Surface& Coatings Technology,
428,
2021.
-
[53]
李学木.
Fabrication of WS2/C composite coatings via electrohydrodynamic atomization and their tribology behaviours.
Applied Surface Science,
538,
2021.
-
[54]
李学木.
One-step mask patterning of micro lead zirconate titanate arrays by electrohydrodynamic atomization.
Ceramics International,
27570,
2020.
-
[55]
邓建新.
Tribological properties of PTFE/PPS films deposited on the ultrasonic rolling textured substrates by electrohydrodynamic atomization.
wear,
2022.
-
[56]
邓建新.
Friction performance of micro textured surface machined by different laser incident angle under dry conditions.
Optics and Laser Technology,
2022.
-
[57]
邓建新.
Preparation and infrared properties of Ni3Al-Cr3C2 composite films deposited by electrohydrodynamic atomization technology. Materials Chemistry and Physic.
Materials Chemistry and Physics,
2022.
-
[58]
邓建新.
Tribological properties of TiO2-MoS2 soft-hard alternate films deposited by electrohydrodynamic atomization with a bionic mask.
Colloids and Surfaces A: Physicochemical and Engineering Aspects,
2022.
-
[59]
王冉.
Microstructure and wear behaviors of electrohydrodynamically atomized Ni3Al/Cr3C2–MoS2 self-lubricating composite films.
Surface and Coating Technology,
2022.
-
[60]
李学木.
Fabrication of WS2/C composite coatings via electrohydrodynamic atomization and their tribology behaviors.
Applied Surface Science,
2021.
-
版权所有 ©山东大学 地址:中国山东省济南市山大南路27号 邮编:250100
查号台:(86)-0531-88395114
值班电话:(86)-0531-88364731 建设维护:山东大学信息化工作办公室
-
手机版
登录 | 山东大学