Zhanqiang Liu
Professor
山东大学教授，从事制造工程理论与技术研究，机械工程学院学术委员会主任，山东省高效切削加工工程技术研究中心主任，高效洁净机械制造教育部重点实验室（山东大学）副主任，山东省高等学校高端装备设计制造与刀具技术实验室主任。 国家杰出青年科学基金获得者、国务院政府特殊津贴专家、宝钢优秀教师、山东省泰山学者特聘教授、山东省有突出贡献的中青年专家、教育部新世纪优秀人才、山东省优秀教师、山东省杰出青年科学基金获得者、霍英东教育基金会高等院校青年教... More+
Paper Publications
-
[261] 郝广超. Experimental study on the formation of TCR and thermal behavior of hard machining using TiAlN coa.... INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 140, 1, 2019.
-
[262] 李晓君. Tool Wear, Surface Topography, and Multi-Objective Optimization of Cutting Parameters during Mach.... METALS, 9, 2019.
-
[263] 刘战强. 基于响应曲面法的Nomex蜂窝高速铣削参数优化. 《工具技术》, 54, 2020.
-
[264] Zhang, P. R.. Machinability for dry turning of laser cladded parts with conventional vs. wiper insert. Journal of manufacturing processes, 28, 494, 2017.
-
[265] 刘阳. Analysis and implementation of chatter frequency dependent constrained layer damping tool holder .... JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Journal, 266, 687, 2019.
-
[266] Zhang, Peirong. On sustainable manufacturing of Cr-Ni alloy coatings by laser cladding and high-efficiency turnin.... Journal of Cleaner Production, 161, 676, 2017.
-
[267] 刘战强. A New Finite Element Approach Without Chip Formation to Predict Residual Stress Profile Patterns .... Technical Publication. MSEC2009, 0, 419, 2009.
-
[268] 刘战强. 高速切削过程中绝热剪切临界条件的研究. 《工具技术》, 0, 8, 2009.
-
[269] 刘战强. 车削高温合金GH2132时切削力和表面粗糙度的建模与试验分析. 《工具技术》, 43, 19, 2009.
-
[270] 刘战强. 高速车削铁基高温合金硬质合金刀具磨损机理. 《农业机械学报》, 40, 240, 2009.
-
[271] 刘战强. A new FEM approach to predict residual stress profiles in hard turning without simulating chip fo.... Transactions of NAMRC/SME, 38, 33, 2010.
-
[272] 刘战强. Experimental study on wear mechanism of cutting tool and cutting temperature in high speed machin.... Advanced Materials research, 102-104, 525, 2010.
-
[273] 刘战强. Cutting forces and tool wear patterns in five-axis milling Fe-based superalloy with bull-nose end.... Advanced Materials research, 97-101, 2049, 2010.
-
[274] 刘战强. 铣削粉末冶金高温合金的刀具优选试验. 《制造技术与机床》, 0, 105, 2010.
-
[275] 刘战强. Machinability Investigation in High Speed Turning of Powder Metallurgy nickel-base Superalloy wit.... Advanced Materials research, 139-141, 805, 2010.
-
[276] 刘战强. Machining Performance and Tool Wear of Coated Carbide Inserts in High Speed Turning Powder Metall.... IEEE CPS, 0, 71, 2010.
-
[277] 刘战强. 涂层刀具铣削粉末冶金镍基高温合金试验研究. 华南理工大学学报, 38, 83, 2010.
-
[278] 刘战强. Experimental research in high efficiency milling of powder metallurgy superalloy. ICMTMA 2010, 0, 178, 2010.
-
[279] 刘战强. 涂层硬质合金刀具铣削粉末冶金高温合金的切削性能研究. 四川大学学报(工程科学版), 42, 206, 2010.
-
[280] 刘战强. Prediction the effect of vibration on machining distortion in HSM aerospace monolithic components. MSEC2010, 0, 12, 2010.