Zhanqiang Liu 山东大学主页平台管理系统--Home

Zhanqiang Liu Professor

山东大学教授，从事制造工程理论与技术研究，机械工程学院学术委员会主任，山东省高效切削加工工程技术研究中心主任，高效洁净机械制造教育部重点实验室（山东大学）副主任，山东省高等学校高端装备设计制造与刀具技术实验室主任。国家杰出青年科学基金获得者、国务院政府特殊津贴专家、宝钢优秀教师、山东省泰山学者特聘教授、山东省有突出贡献的中青年专家、教育部新世纪优秀人才、山东省优秀教师、山东省杰出青年科学基金获得者、霍英东教育基金会高等院校青年教... More+

Paper Publications

Home >> Scientific Resear... >> Paper Publication...

[281] 刘战强. Study on Wear Properties and Mechanisms of Coated Carbide Tools in Dry Turning of 300M Steel. Advanced Materials research, 314-316, 1142, 2011.
[282] 刘战强. 涂层硬质合金刀具铣削粉末冶金镍基高温合金时的失效机理. 北京工业大学学报., 37, 1, 2011.
[283] 刘战强. Selection of Tool Materials and Cutting Parameters Optimization for Turning Powder Metallurgy Nic.... Advanced Materials research, 154-155, 708, 2011.
[284] 刘战强. Research on Cutting Performance of High-speed Steel Drills during Drilling the Powder Metallurgy .... Key Engineering Materials, 464, 556, 2011.
[285] 刘战强. SURFACE INTEGRITY AND FATIGUE STRENGTH OF HARD MILLED SURFACES. MSEC2011, 0, 199, 2011.
[286] 刘战强. 刀具寿命变异系数的研究. 《工具技术》, 1995.
[287] 刘战强. 高速车削数据库的研究与开发. 《机械工程师》, 8, 10, 2003.
[288] 刘战强. 陶瓷刀具切削数据库管理系统的建立. 《机械工程师》, 2003.
[289] 刘战强. Thermodynamic entropy and its application in metal cutting system. Precision Mechanical Measurements, 7130, 2008.
[290] 刘战强. 静态铣削力作用下的薄板大变形有限元分析. 中北大学学报, 30, 21, 2009.
[291] 刘战强. 铣刀参数对薄壁零件铣削稳定性的影响. 华南理工大学学报, 37, 29, 2009.
[292] 刘战强. Analytical and numerical solutions of transient heat conduction in monolayer coated tools. Materials Processing Technology, 209, 2369, 2009.
[293] 刘战强. Case modifying of high-speed cutting database based on CSP and similarity theory. Frontiers of Mechanical Engineering, 4, 83, 2009.
[294] 刘战强. 基于热力学的LT55陶瓷刀具加工45钢扩散与氧化磨损. 中国机械工程, 20, 74, 2009.
[295] 刘战强. The influence of tool flank wear on residual stresses induced by milling aluminum alloy. Journal of Materials Processing Technology, 209, 4502, 2009.
[296] 刘战强. A new approach to cutting temperature prediction considering the diffusion layer in coated tools. Machine Tools and Manufacture, 49, 619, 2009.
[297] 刘战强. 涂层刀具切削温度研究现状. 《工具技术》, 43, 3, 2009.
[298] 刘战强. 涂层刀具切削温度自测传感器. 中国机械工程, 20, 397, 2009.
[299] 刘战强. 基于热力学的WC基硬质合金刀具加工各种常见工件材料的匹配研究. 《制造技术与机床》, 0, 94, 2009.
[300] 刘战强. 基于对流换热原理的刀具热量和温度研究. 《武汉理工大学学报》, 31, 130, 2009.

total697 15/35

first previous next last Page

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[281] 刘战强. Study on Wear Properties and Mechanisms of Coated Carbide Tools in Dry Turning of 300M Steel. Advanced Materials research, 314-316, 1142, 2011.

[282] 刘战强. 涂层硬质合金刀具铣削粉末冶金镍基高温合金时的失效机理. 北京工业大学学报., 37, 1, 2011.

[283] 刘战强. Selection of Tool Materials and Cutting Parameters Optimization for Turning Powder Metallurgy Nic.... Advanced Materials research, 154-155, 708, 2011.

[284] 刘战强. Research on Cutting Performance of High-speed Steel Drills during Drilling the Powder Metallurgy .... Key Engineering Materials, 464, 556, 2011.

[285] 刘战强. SURFACE INTEGRITY AND FATIGUE STRENGTH OF HARD MILLED SURFACES. MSEC2011, 0, 199, 2011.

[286] 刘战强. 刀具寿命变异系数的研究. 《工具技术》, 1995.

[287] 刘战强. 高速车削数据库的研究与开发. 《机械工程师》, 8, 10, 2003.

[288] 刘战强. 陶瓷刀具切削数据库管理系统的建立. 《机械工程师》, 2003.

[289] 刘战强. Thermodynamic entropy and its application in metal cutting system. Precision Mechanical Measurements, 7130, 2008.

[290] 刘战强. 静态铣削力作用下的薄板大变形有限元分析. 中北大学学报, 30, 21, 2009.

[291] 刘战强. 铣刀参数对薄壁零件铣削稳定性的影响. 华南理工大学学报, 37, 29, 2009.

[292] 刘战强. Analytical and numerical solutions of transient heat conduction in monolayer coated tools. Materials Processing Technology, 209, 2369, 2009.

[293] 刘战强. Case modifying of high-speed cutting database based on CSP and similarity theory. Frontiers of Mechanical Engineering, 4, 83, 2009.

[294] 刘战强. 基于热力学的LT55陶瓷刀具加工45钢扩散与氧化磨损. 中国机械工程, 20, 74, 2009.

[295] 刘战强. The influence of tool flank wear on residual stresses induced by milling aluminum alloy. Journal of Materials Processing Technology, 209, 4502, 2009.

[296] 刘战强. A new approach to cutting temperature prediction considering the diffusion layer in coated tools. Machine Tools and Manufacture, 49, 619, 2009.

[297] 刘战强. 涂层刀具切削温度研究现状. 《工具技术》, 43, 3, 2009.

[298] 刘战强. 涂层刀具切削温度自测传感器. 中国机械工程, 20, 397, 2009.

[299] 刘战强. 基于热力学的WC基硬质合金刀具加工各种常见工件材料的匹配研究. 《制造技术与机床》, 0, 94, 2009.

[300] 刘战强. 基于对流换热原理的刀具热量和温度研究. 《武汉理工大学学报》, 31, 130, 2009.