Zhanqiang Liu
Professor
山东大学教授，从事制造工程理论与技术研究，机械工程学院学术委员会主任，山东省高效切削加工工程技术研究中心主任，高效洁净机械制造教育部重点实验室（山东大学）副主任，山东省高等学校高端装备设计制造与刀具技术实验室主任。 国家杰出青年科学基金获得者、国务院政府特殊津贴专家、宝钢优秀教师、山东省泰山学者特聘教授、山东省有突出贡献的中青年专家、教育部新世纪优秀人才、山东省优秀教师、山东省杰出青年科学基金获得者、霍英东教育基金会高等院校青年教... More+
Paper Publications
-
[401] 刘战强. Optimization of cutting parameters and burrs control with PMMA coating in micro-milling titanium .... Materials science forum, 2016.
-
[402] 刘战强. Numerical Analysis of Aeroacoustic Noise for High-Speed Face Milling Cutters in Three Dimensional.... ASME Journal of Manufacturing Science and Engineering, 2012.
-
[403] 刘战强. Development of a thermocouple sensor using tool coating and its substrate to measure metal turnin.... International Journal of Materials and Product Technology, 2013.
-
[404] 刘战强. Experimental study on cutting force and surface roughness for 7050-T7451 aluminum alloy of high s.... Applied Mechanics & Materials, 2013.
-
[405] 刘战强. 高效切削与高完整性加工技术. 航空制造技术, 2016.
-
[406] 刘战强. 加强刀具技术研究，提高制造业竞争力. 航空制造技术, 2016.
-
[407] 刘战强. 旋转超声滚压加工中的滚压力与滚压深度及表面形貌研究. 《兵工学报》, 2016.
-
[408] 刘战强. 约束阻尼型镗杆的优化及减振性能研究. 《航空学报》, 2016.
-
[409] 刘战强. 沟槽与方柱阵列结构的微铣削和加工表面疏水性. 机械工程学报, 2016.
-
[410] 刘战强. 材料动态性能对高速切削切屑形成的影响规律. 中国科学-E：技术科学, 2016.
-
[411] 刘战强. Investigations on deformation and fracture behavior of workpiece material during high speed machi.... CIRP Journal of Manufacturing Science and Technology, 2016.
-
[412] 刘战强. Experimental investigation of cutting tool temperature during slot milling of AerMet 100 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016.
-
[413] 刘战强. Evolutions of grain size and micro-hardness during chip formation and machined surface generation.... The International Journal of Advanced Manufacturing Technology, 2016.
-
[414] 刘战强. Machinability investigations on turning of Cr-Ni-based stainless steel cladding formed by laser c.... The International Journal of Advanced Manufacturing Technology, 2016.
-
[415] 刘战强. Method of strain-rate difference calculation in high-speed metal cutting. Measurement, 2016.
-
[416] 刘战强. Modeling and prediction for 3D surface topography in finish turning with conventional and wiper i.... Measurement, 2016.
-
[417] 刘战强. Influence of machined surface roughness on thrust performance of micro-nozzle manufactured by mic.... Experimental Thermal and Fluid Science, 2016.
-
[418] 刘战强. Cutting performance of solid ceramic end milling tools in machining hardened AISI H13 steel. International Journal of Refractory Metals and Hard Materials, 2016.
-
[419] 刘战强. Development of constrained layer damping toolholder to improve chatter stability in end milling. International Journal of Mechanical Sciences, 2016.
-
[420] 刘战强. Plastic deformation induced nano-scale twins in Ti-6Al-4V machined surface with high speed machin.... Materials Science and Engineering: A, 2016.