Zhanqiang Liu
Professor
山东大学教授，从事制造工程理论与技术研究，机械工程学院学术委员会主任，山东省高效切削加工工程技术研究中心主任，高效洁净机械制造教育部重点实验室（山东大学）副主任，山东省高等学校高端装备设计制造与刀具技术实验室主任。 国家杰出青年科学基金获得者、国务院政府特殊津贴专家、宝钢优秀教师、山东省泰山学者特聘教授、山东省有突出贡献的中青年专家、教育部新世纪优秀人才、山东省优秀教师、山东省杰出青年科学基金获得者、霍英东教育基金会高等院校青年教... More+
Paper Publications
-
[421] 刘战强. Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energ.... Journal of Cleaner Production, 2016.
-
[422] 刘战强. 基于CFD的微型拉伐尔喷嘴选型与扩张段长度仿真优化研究. 《四川大学学报（工程科学版）》, 2014.
-
[423] 刘战强. 镍基粉末高温合金切削加工表面白层形成热-力耦合作用机理. 机械工程学报, 2014.
-
[424] 刘战强. 约束阻尼型减振镗杆. 《航空学报》, 2014.
-
[425] 刘战强. Deformation-phase transformation coupling mechanism of white layer formation in high speed machin.... Applied Surface Science, 2014.
-
[426] 刘战强. Serrated chip formation mechanism based on mixed mode of ductile fracture and adiabatic shear. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014.
-
[427] 刘战强. Effect of cutter geometric configuration on aerodynamic noise generation in face milling cutters. Applied Acoustics, 2014.
-
[428] 刘战强. Analytical modeling of adiabatic shear band spacing for serrated chip in high-speed machining. The International Journal of Advanced Manufacturing Technology, 2014.
-
[429] 刘战强. Investigations on the chip formation mechanism and shear localization sensitivity of high-speed m.... The International Journal of Advanced Manufacturing Technology, 2014.
-
[430] 刘战强. Surface morphology and microcrack formation for 7050-T7451 aluminum alloy in high speed milling. The International Journal of Advanced Manufacturing Technology, 78, 281, 2015.
-
[431] 刘战强. Machinability of hastelloy C-276 using Hot-pressed sintered Ti(C7N3)-based cermet cutting tools. Chinese Journal of Mechanical Engineering (English Edition), 28, 599, 2015.
-
[432] 刘战强. Energy consumption characteristics in finish hard milling of tool steels. Procedia Manufacturing, 1, 477, 2015.
-
[433] 刘战强. 基于最小吉布斯自由能的疏水表面接触角研究. 山东大学学报(工学版), 45, 56, 2015.
-
[434] 刘战强. 微喷砂后处理工艺对涂层刀具性能的影响规律. 《现代制造工程》, 85, 2015.
-
[435] 刘战强. 基于UG二次开发技术的CAD/CAE/CAM软件集成方法研究. 《机床与液压》, 43, 141, 2015.
-
[436] 刘战强. 铣削力预测方法和影响因素综述. 《机械科学与技术》, 1190, 2015.
-
[437] 刘战强. 机械加工强化机理与工艺技术研究进展. 中国机械工程, 26, 403, 2015.
-
[438] 刘战强. 切削加工表面变质层厚度的图像识别技术研究. 天津大学学报：自然科学与工程技术版, 547, 2015.
-
[439] 刘战强. Analysis and optimization of surface roughness in rotary ultrasonic burnishing of titanium alloy .... Advanced Materials research, 806, 406, 2015.
-
[440] 刘战强. Modeling and prediction of tool-chip interface temperature in hard machining of H13 steel with PV.... International Journal of Machining and Machinability of Materials, 17, 381, 2015.