Zhanqiang Liu
Professor
山东大学教授，从事制造工程理论与技术研究，机械工程学院学术委员会主任，山东省高效切削加工工程技术研究中心主任，高效洁净机械制造教育部重点实验室（山东大学）副主任，山东省高等学校高端装备设计制造与刀具技术实验室主任。 国家杰出青年科学基金获得者、国务院政府特殊津贴专家、宝钢优秀教师、山东省泰山学者特聘教授、山东省有突出贡献的中青年专家、教育部新世纪优秀人才、山东省优秀教师、山东省杰出青年科学基金获得者、霍英东教育基金会高等院校青年教... More+
Paper Publications
-
[61] Singh, Tejinder Pal. Abrasive Wear Behavior of Cryogenically Treated Boron Steel (30MnCrB4) Used for Rotavator Blades. MATERIALS, 13, 2020.
-
[62] Jamil, Muhammad. Milling of Ti-6Al-4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface .... international Journal of Advanced Manufacturing Technology, 107, 4141, 2020.
-
[63] Khanna, Navneet. Optimization of Power Consumption Associated with Surface Roughness in Ultrasonic Assisted Turnin.... MATERIALS, 12, 2019.
-
[64] 王冬琦. Cutting characteristics of porcine tenderloin tissue along tangential direction of surface. international Journal of Advanced Manufacturing Technology, 98, 17, 2018.
-
[65] 石佳昊. On the segmentation-driven vibration in milling titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engine, 34, 1508, 2018.
-
[66] 彭业振. A tool wear condition monitoring method for non-specific sensing signals. 国际机械科学, 2023.
-
[67] 冀寒松. Episodes of single-crystal material removal mode and machinability in the micro-cutting process o.... Journal of Materials Research and Technology, 24, 2074-2085, 2023.
-
[68] 曹诚. Fiber orientation effects on grinding characteristics and removal mechanism of 2.5D Cf/SiC compos.... CHINESE JOURNAL OF AERONAUTICS, 2023.
-
[69] 付辉. Automatic detection and pixel-level quantification of surface microcracks in ceramics grinding: A.... 测量, 224, 2024.
-
[70] 李振民. Chatter suppression mechanism and parameters configuration of the spindle speed variation with pi.... international Journal of Advanced Manufacturing Technology, 122, 3041-3055, 2022.
-
[71] 彭业振. Intelligent recognition of tool wear in milling based on a single sensor signal. international Journal of Advanced Manufacturing Technology, 124, 1077-1093, 2022.
-
[72] 王润琼. A milling tool wear monitoring method with sensing generalization capability. JOURNAL OF MANUFACTURING SYSTEMS, 68, 25-41, 2023.
-
[73] 冀寒松. Grain-scale material removal mechanisms of crystalline material micro-cutting. 国际机械科学, 233, 2022.
-
[74] 王润琼. Self-adaptive fusion of local-temporal features for tool condition monitoring: A human experience.... Mechanical Systems and Signal Processing, 195, 2023.
-
[75] 孟芳汀. Influence of unilateral constraint on machining dynamics of large overhang milling cutter. international Journal of Advanced Manufacturing Technology, 125, 3577-3591, 2023.
-
[76] 王润琼. 基于特征自适应融合和集成学习的高性能铣削刀具状态监测. 基于铣削力精确建模的工件表面, 1-9, 2023.
-
[77] 李振民. Response prediction of cantilever plates via mode superposition method and combination method of .... Mechanical Systems and Signal Processing, 200, 2023.
-
[78] 冀寒松. Inconel-718微构件晶粒尺度伪随机建模与仿真. 基于铣削力精确建模的工件表面, 1-9, 2023.
-
[79] 付辉. Grinding surface roughness prediction for silicon nitride ceramics: A dynamic grinding force and .... Ceramics International, 2023.
-
[80] 高帆. Influence of Biocompatible Hydrophilic Coated Needle on Puncture Process through a Simulation Met.... 89, 214-221, 2020.