![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：威海校区/千佛山校区机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 联系方式：邮箱 melius@sdu.edu.cn
QQ 834534349
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[201]
Wang, Qingqing.
Investigation the effect of strain history on crystallographic texture evolution based on the perspe.
Materials Characterization,
131,
331,
2017.
-
[202]
陈栾霞.
Process-surface morphology-tribological property relationships for H62 brass employing various manuf.
Tribology International,
148,
2020.
-
[203]
梁晓亮.
Physic-chemical analysis for high-temperature tribology of WC-6Co against Ti-6Al-4V by pin-on-disc m.
Tribology International,
146,
2020.
-
[204]
梁晓亮.
Surface integrity analysis for high-pressure jet assisted machined Ti-6Al-4V considering cooling pre.
Journal of manufacturing processes,
40,
149,
2019.
-
[205]
陈栾霞.
Surface Characterization and Tribological Performance of Anodizing Micro-Textured Aluminum-Silicon A.
Material,
12,
2019.
-
[206]
Zhang, Peirong.
Plastic deformation and critical condition for orthogonal machining two-layered materials with laser.
Journal of Cleaner Production,
149,
1033,
2017.
-
[207]
梁晓亮.
Dynamic recrystallization characterization in Ti-6Al-4V machined surface layer with process-microstr.
Applied Surface Science,
530,
2020.
-
[208]
Teimouri, Reza.
Analytical modeling of surface generation in ultrasonic ball burnishing including effects of indenta.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING,
20,
2020.
-
[209]
Zhang, Jingjie.
Prediction of cutting temperature distributions on rake face of coated cutting tools.
international Journal of Advanced Manufacturing Technology,
91,
49,
2017.
-
[210]
梁晓亮.
Tool wear-induced microstructure evolution in localized deformation layer of machined Ti-6Al-4V.
JOURNAL OF MATERIALS SCIENCE Journal,
55,
3636,
2020.
-
[211]
杨东.
钛合金TC4低塑性滚压表面完整性的实验研究.
华南理工大学学报（自然科学版）,
45,
137,
2017.
-
[212]
Liang, Xiaoliang.
Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry.
international Journal of Advanced Manufacturing Technology,
93,
1617,
2017.
-
[213]
牛金涛.
Anticorrosion property enhancement of Al–Li alloy 2A97 by lowering machined surface roughness.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,
2021.
-
[214]
赵金富.
Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiA.
Journal of Manufacturing Processes,
56,
1155,
2020.
-
[215]
梁晓亮.
Multi-pattern failure modes and wear mechanisms of WC-Co tools in turning Ti-6Al-4V.
Ceramics International,
2020.
-
[216]
Zhang, Peirong.
On machinability and surface integrity in subsequent machining of additively-manufactured thick coat.
Journal of Manufacturing Processes,
53,
123,
2020.
-
[217]
Mohsan, Aziz Ui Hassan.
A review on the progress towards improvement in surface integrity of Inconel 718 under high pressure.
international Journal of Advanced Manufacturing Technology,
91,
107,
2017.
-
[218]
Zhang, Peirong.
A study on corrosion behaviors of laser cladded Fe-Cr-Ni coating in as-cladded and machined conditio.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,
70,
711,
2019.
-
[219]
牛金涛.
Comparative Study on Electrochemical Behavior of Al-Li Alloy 2A97 Machined Surfaces in Sodium Chlori.
IEEE Access ,
7,
134198,
2020.
-
[220]
牛金涛.
Effect of machining-induced surface integrity on the corrosion behavior of Al-Li alloy 2A97 in sodiu.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,
70,
259,
2019.
