![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：威海校区/千佛山校区机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 联系方式：邮箱 melius@sdu.edu.cn
QQ 834534349
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[221]
赵金富.
Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiA.
Journal of Manufacturing Processes,
56,
1155,
2020.
-
[222]
梁晓亮.
Multi-pattern failure modes and wear mechanisms of WC-Co tools in turning Ti-6Al-4V.
Ceramics International,
2020.
-
[223]
Zhang, Peirong.
On machinability and surface integrity in subsequent machining of additively-manufactured thick coat.
Journal of Manufacturing Processes,
53,
123,
2020.
-
[224]
Mohsan, Aziz Ui Hassan.
A review on the progress towards improvement in surface integrity of Inconel 718 under high pressure.
international Journal of Advanced Manufacturing Technology,
91,
107,
2017.
-
[225]
Zhang, Peirong.
A study on corrosion behaviors of laser cladded Fe-Cr-Ni coating in as-cladded and machined conditio.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,
70,
711,
2019.
-
[226]
牛金涛.
Comparative Study on Electrochemical Behavior of Al-Li Alloy 2A97 Machined Surfaces in Sodium Chlori.
IEEE Access ,
7,
134198,
2020.
-
[227]
牛金涛.
Effect of machining-induced surface integrity on the corrosion behavior of Al-Li alloy 2A97 in sodiu.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION,
70,
259,
2019.
-
[228]
王桂杰.
Effect of electrochemical polishing on surface quality of nickel-titanium shape memory alloy after m.
Journal of Materials Research and Technology,
9,
253,
2020.
-
[229]
刘战强.
Investigation of size effect and idling on specific energy consumption and energy efficiency in high.
Energy ,
2020.
-
[230]
刘战强.
基于PLS的汽车外覆盖件冲压线运动规划及仿真.
计算机集成制造系统,
2020.
-
[231]
王兵.
An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Alloy I.
International Journal of Precision Engineering and Manufacturing-Green Technology,
7,
35,
2020.
-
[232]
梁晓亮.
Tool wear induced modifications of plastic flow and deformed material depth in new generated surface.
Journal of Materials Research and Technology,
9,
10782,
2020.
-
[233]
王兵.
高速切削材料变形及断裂行为对切屑形成的影响机理研究.
金属加工(冷加工),
2018.
-
[234]
刘文韬.
钛合金Ti-6Al-4V高压冷却车削过程有限元分析.
现代制造工程,
2018.
-
[235]
刘战强.
Correlation between the microstructure and machinability in machining Al–(5-25)wt.%Si alloys.
SAGE Open,
2020.
-
[236]
Wang, Bing.
Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T745.
Journal of manufacturing processes,
27,
114,
2017.
-
[237]
赵建.
Plastic flow behavior for machined surface material Ti-6Al-4V with rotary ultrasonic burnishing.
Journal of Materials Research and Technology,
9,
2387,
2020.
-
[238]
刘灿宇.
TiN刀具涂层抗多次冲击性能研究.
现代制造工程,
2018.
-
[239]
Zhang, Peirong.
Enhancing surface integrity and corrosion resistance of laser cladded Cr-Ni alloys by hard turning a.
Applied Surface Science,
409,
169,
2017.
-
[240]
郝广超.
Thermal contact resistance enhancement with aluminum oxide layer generated on TiAlN-coated tool and .
Surface＆ Coatings Technology,
385,
2020.
