![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[561]
宋清华.
Precise chatter monitoring of thin-walled milling based on parametric time-frequency transform metho.
Journal of Materials Processing Technology,
2020.
-
[562]
宋清华.
Influence of biocompatible hydrophilic needle surface coating on puncture biopsy process for biomedi.
Coatings,
10,
2020.
-
[563]
马海峰.
Sliding Mode Control for Uncertain Discrete-Time Systems using An Adaptive Reaching Law.
IEEE Transactions on Circuits and Systems II: Express Briefs,
2020.
-
[564]
万熠 , 艾兴 , 张蕊
Corrosion resistance and biological activity of TiO2 implant coatings produced in oxygen-rich enviro.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE,
231,
20,
2017.
-
[565]
靳一帆.
Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling an.
Journal of Materials Processing Technology,
240,
233,
2017.
-
[566]
王桂森.
Fabrication of an orderly micro/nanostructure on titanium surface and its effect on cell proliferati.
Mater Lett,
212,
247,
2018.
-
[567]
王桂森.
Surface Functionalization of Micro/Nanostructured Titanium with Bioactive Ions to Regulate the Behav.
Advanced Engineering Materials,
19,
2017.
-
[568]
王桂森.
Construction of Complex Structures Containing Micro-Pits and Nano-Pits on the Surface of Titanium fo.
MATERIALS,
12,
2019.
-
[569]
史振宇.
Swept Mechanism of Micro-Milling Tool Geometry Effect on Machined Oxygen Free High Conductivity Copp.
Materials,
10,
2017.
-
[570]
刘战强 and 陈龙.
Optimization design and simulationanalysis of composite material anti-/deicing component for wind tu.
26TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS, PTS 1-7,
227,
2019.
-
[571]
王兵 , 刘战强 , 宋清华 , 万熠 and 任小平.
A Modified Johnson-Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,
141,
2019.
-
[572]
杜宜聪 , 宋清华 , 刘战强 and 万熠.
Size-dependent responses of micro-end mill based on strain gradient elasticity theory.
international Journal of Advanced Manufacturing Technology,
100,
1839,
2019.
-
[573]
黄传真 , 朱洪涛 , 刘战强 , 刘玥 and 刘国梁.
The modified surface properties and fatigue life of Incoloy A286 face-milled at different cutting pa.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,
704,
1,
2017.
-
[574]
黄传真 , 邹斌 , 刘含莲 , 刘战强 , 刘玥 and 刘国梁.
The modification of corrosion resistance of 17-4PH stainless steel by cutting process.
Journal of manufacturing processes,
49,
2020.
-
[575]
黄传真 , 邹斌 , 刘战强
Study on surface integrity of compacted graphite iron milled by cemented carbide tools and ceramic t.
International J of Advanced Manufacturing Technology,
103,
4123,
2019.
-
[576]
宋清华 and 刘战强.
Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy.
Journal of Cleaner Production,
2020.
-
[577]
陈龙 and 刘战强.
Numerical Simulation on Effect of Graphene Doped Morphology on Heat Transfer Efficiency of Anti-/dei.
2019.
-
[578]
宋清华 and 刘战强.
Vibration suppression of thin-walled workpiece milling using a time-space varying PD control method .
international Journal of Advanced Manufacturing Technology,
2019.
-
[579]
宋清华 , 刘战强 and 陈龙.
Hydrodynamic lubrication analysis of two-dimensional section between piston skirt and textured cylin.
Tribology International,
2019.
-
[580]
陈龙 and 刘战强.
Optimization design and simulationanalysis of composite material anti-.
2018.
