![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[581]
宋清华 , 刘战强 and 万熠.
A generalized cutting force model for five-axis milling processes.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,
233,
3,
2019.
-
[582]
刘逢时 , 刘战强 and 王兆辉.
先进切削加工技术综述.
《工具技术》,
37,
3,
2003.
-
[583]
黄传真 and 刘战强.
Study on advanced cutting tools fabricated from coated powders and their cutting performance.
ADVANCES IN GRINDING AND ABRASIVE PROCESSES,
19-25,
259,
2004.
-
[584]
宋清华 and 刘战强.
Influence of rotational damping on stability in end milling processes.
International Journal of Advanced Manufacturing Technology ,
2018.
-
[585]
宋清华 , 刘战强 , 万熠 and 石佳昊.
On the segmentation-driven vibration in milling titanium alloy.
Journal of Engineering Manufacture ,
2018.
-
[586]
宋清华 , 刘战强 and 万熠.
A generalized cutting force model for five-axis milling processes.
Journal of Engineering Manufacture ,
2018.
-
[587]
宋清华 , 刘战强 and 杜宜聪.
Size-dependent responses of micro-end mill based on strain gradient elasticity theory.
International Journal of Advanced Manufacturing Technology ,
2018.
-
[588]
宋清华 , 刘战强 and 高建.
Chatter detection and stability regions acquisition in thin-walled workpiece milling based on CMWT.
International Journal of Advanced Manufacturing Technology ,
2018.
-
[589]
万熠 , 刘战强 and 王桂森.
Bioactivity of micropatterned TiO2 nanotubes fabricated by micro-milling and anodic oxidation.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS,
95,
114,
2019.
-
[590]
宋清华 , 刘战强 and 万熠.
Parametric study of dynamic response of sandwich plate under moving loads.
Thin-Walled structures,
2018.
-
[591]
宋清华 , 刘战强 and 贾俊楠.
Effect of wall roughness on performance of microchannel applied in microfluidic device.
Microsystem Technologies ,
2018.
-
[592]
任小平 and 刘战强.
A simulation model for predicting surface integrity coupled thermal-mechanical effect in turning of .
The International Journal of Advanced Manufacturing Technology.,
100,
1825,
2019.
-
[593]
宋清华 , 刘战强 and 王冬琦.
Cutting characteristics of porcine tenderloin tissue along tangenrial direction of surface.
The International Journal of Advanced Manufacturing Technology.,
2018.
-
[594]
宋清华 , 刘战强 and 巫永琳.
Stability of turning process with a distributed cutting force model.
The International Journal of Advanced Manufacturing Technology.,
2018.
-
[595]
邹斌 , 黄传真 and 刘战强.
Machinability of Hastelloy C-276 Using Hot-pressed Sintered Ti(C7N3)-based Cermet Cutting Tools.
chinese journal of mechanical engineering,
28,
599,
2015.
-
[596]
宋清华 and 刘战强.
Dynamic response and parametric analysis of geometrically nonlinear functionally graded plate with a.
IEEE Access ,
2018.
-
[597]
万熠 , 刘战强 , 朱洪涛 and 艾兴.
Research on Cutting Cast Super Alloy K24 with Milling and Abrasive Water Jet Methods.
Materials science forum,
697-698,
157,
2012.
-
[598]
刘战强 , 史振宇 , 宋清华 , 万熠 and 蔡玉奎.
Optimum end milling tool path and machining parameters for micro Laval nozzle manufacturing.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,
231,
1703,
2017.
-
[599]
宋清华 , 刘战强 , 万熠 and 石佳昊.
Formulating a numerically low-cost method of a constrained layer damper for vibration suppression in.
International Journal of Mechanical Sciences,
128,
294,
2017.
-
[600]
宋清华 , 刘战强 and 万熠.
A time-space discretization method in milling stability prediction of thin-walled component.
international Journal of Advanced Manufacturing Technology,
89,
2675,
2017.
