![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[641]
万熠 , 刘战强 and 艾兴.
Tool wear patterns and mechanisms of solid cemented carbide in high-speed milling of aluminum alloy.
Transactions of Nanjing University of Aeronautics and Astronautics,
v24,
125,
2007.
-
[642]
万熠 , 艾兴 and 刘战强.
高速铣削航空铝合金7050－T7451时刀具的磨损破损.
机械工程学报,
43,
103,
2007.
-
[643]
宋清华 , 万熠 , 艾兴 , 赵军 and 刘战强.
Novel method for dynamic optimization of stability in high-speed milling system.
Transactions of Nanjing University of Aeronau,
26,
184,
2009.
-
[644]
刘战强 and 周军.
机床可用度与缓冲区容量的关系模型研究.
《工具技术》,
24,
2006.
-
[645]
任小平 and 刘战强.
Influence of cutting parameters on work hardening behavior of surface layer during turning superallo.
The International Journal of Advanced Manufacturing Technology,
2016.
-
[646]
黄传真 , 刘战强 and 邹斌.
Machinability of Hastelloy C-276 Using Hot-pressed Sintered Ti(C7N3)-based Cermet Cutting Tools.
chinese journal of mechanical engineering,
28,
599,
2015.
-
[647]
刘战强 and 万熠.
Burr Controlling in Micro Milling with Supporting Material Method..
Procedia Manufacturing,
2015,
501,
2015.
-
[648]
刘战强 , 艾兴 and 万熠.
Cutting Forces and Tool Wear Patterns in Five-axis Milling Fe-based Super Alloy with Bull-nose End M.
Advanced Materials research,
97-101,
2049,
2010.
-
[649]
宋清华 , 刘战强 and 万熠.
Identification of Stability Lobes in High-Speed Milling Flexible Parts with Bull-Nose End Mills.
Key Engineering Materials,
443,
297,
2010.
-
[650]
刘战强 , 艾兴 and 万熠.
Research on Thermodynamic Characteristics in High-Speed Machining System.
Advanced Materials research,
188,
21,
2011.
-
[651]
刘战强 and 万熠.
Effect of milling speed and feed on surface residual stress of 7050-T7451 aluminum alloy.
Key Engineering Materials,
499,
217,
2012.
-
[652]
刘战强 , 艾兴 and 宋清华.
Comprehensive cutting force model for milling processes with solid end mills and inserted cutters.
Key Engineering Materials,
82,
2014.
-
[653]
刘战强 and 万熠.
Turbine blade distortion analysis during spiral NC milling based on FEM.
Materials science forum,
723,
143,
2012.
-
[654]
刘战强 , 艾兴 and 宋清华.
Subdivision of chatter-free regions and optimal cutting parameters based on vibration frequencies fo.
International Journal of Mechanical Sciences,
83,
172,
2014.
-
[655]
刘战强 and 万熠.
Influence of milling parameters on surface residual stresses of 7050-T7451 aluminum alloy.
Materials science forum,
723,
208,
2012.
-
[656]
刘战强 and 宋清华.
Boring bar with constrained layer damper for improving process stability.
The International Journal of Advanced Manufacturing Technology,
83,
1951,
2016.
-
[657]
刘战强 and 万熠.
Damage Analysis of Cemented Carbide Tool in High Speed Milling Induced by Thermal Stress with Laser .
Advanced Materials research,
69-70,
399,
2009.
-
[658]
刘战强 , 万熠 and 任小平.
Time Molding in Rough Milling of Circula.
Materials science forum,
723,
87,
2012.
-
[659]
刘战强 , 万熠 and 任小平.
混合推理在难加工材料切削数据库系统的应用.
《工具技术》,
45,
35,
2011.
-
[660]
邓建新 , 刘战强 and 周军.
Intelligent matching of cutting tools with workpiece materials.
Key Engineering Materials,
315-316,
411,
2006.
