![]()
刘战强
-
教授
博士生导师
硕士生导师
- 性别：男
- 毕业院校：香港城市大学
- 学历：研究生(博士后)
- 学位：博士生
- 在职信息：在职
- 所在单位：威海校区/千佛山校区机械工程学院
- 入职时间： 1994-07-01
- 学科：机械制造及其自动化
- 办公地点：山东大学威海校区
山东大学千佛山校区西配楼
- 联系方式：邮箱 melius@sdu.edu.cn
QQ 834534349
- 电子邮箱：melius@sdu.edu.cn
访问量：
-
[661]
刘战强 and 任小平.
Influence of cutting parameters on work hardening behavior of surface layer during turning superallo.
The International Journal of Advanced Manufacturing Technology,
2016.
-
[662]
刘战强 , 万熠 , 艾兴 and 宋清华.
Instability of internal damping due to collet chuck holder for rotating spindle-holder-tool system.
Mechanism and Machine Theory,
101,
95,
2016.
-
[663]
刘战强 , 万熠 and 宋清华.
Application of Sherman-Morrison-Woodbury formulas in instantaneous dynamic of peripheral milling for.
International Journal of Mechanical Sciences,
96-97,
79,
2015.
-
[664]
刘战强 , 赵军 , 李安海 and 万熠.
先进切削刀具及未来趋势.
航空制造技术,
2014,
40,
2014.
-
[665]
刘战强 , 艾兴 and 宋清华.
The influence of chatter on machining distortion for thin-walled component peripheral milling.
Advances in Mechanical Engineering,
2014.
-
[666]
刘战强 , 史振宇 and 宋清华.
Chatter stability for micromilling processes with flat end mill.
The International Journal of Advanced Manufacturing Technology,
1159,
2014.
-
[667]
刘战强 , 艾兴 and 宋清华.
Comprehensive cutting force model for milling processes with solid end mills and inserted cutters.
Key Engineering Materials,
82,
2014.
-
[668]
刘战强 , 艾兴 and 万熠.
Research on Thermodynamic Characteristics in High-Speed Machining System.
Advanced Materials research,
188,
21,
2011.
-
[669]
刘战强 , 朱洪涛 , 艾兴 and 万熠.
Research on Cutting Cast Super Alloy K24 with Milling and Abrasive Water Jet Methods.
Materials science forum,
697-698,
157,
2012.
-
[670]
刘战强 and 万熠.
Effect of milling speed and feed on surface residual stress of 7050-T7451 aluminum alloy.
Key Engineering Materials,
499,
217,
2012.
-
[671]
刘战强 and 万熠.
Influence of milling parameters on surface residual stresses of 7050-T7451 aluminum alloy.
Materials science forum,
723,
208,
2012.
-
[672]
刘战强 and 万熠.
Turbine blade distortion analysis during spiral NC milling based on FEM.
Materials science forum,
723,
143,
2012.
-
[673]
刘战强 and 史振宇.
Actually Geometry of Milling Tool Involved in Cutting Process.
Materials science forum,
723,
394,
2012.
-
[674]
刘战强 , 万熠 and 任小平.
A computer-based intelligent system for automatic tool selection.
Materials science forum,
723,
238,
2012.
-
[675]
刘战强 , 万熠 and 任小平.
Time Molding in Rough Milling of Circula.
Materials science forum,
723,
87,
2012.
-
[676]
刘战强 , 王兆辉 and 刘逢时.
先进切削加工技术综述.
《工具技术》,
37,
3,
2003.
-
[677]
刘战强 , 万熠 and 宋清华.
Parametric study of dynamic response of sandwich plate under moving loads.
Thin-Walled structures,
2018.
-
[678]
刘战强 and 任小平.
A simulation model for predicting surface integrity coupled thermal-mechanical effect in turning of .
The International Journal of Advanced Manufacturing Technology.,
100,
1825,
2019.
-
[679]
刘战强 , 宋清华 , 万熠 and 石佳昊.
A novel stability prediction approach for thin-walled component milling considering material removin.
中国航空学报（英文版）,
30,
1789,
2017.
-
[680]
刘战强 and 宋清华.
Influence of rotational damping on stability in end milling processes.
International Journal of Advanced Manufacturing Technology ,
2018.
