sunjie 山东大学主页平台管理系统--Home

Paper Publications

Home >> Scientific Resear... >> Paper Publication...

[21] 武冲. Dual PID Adaptive Variable Impedance Constant Force Control for Grinding Robot. Applied Sciences-Basel, 13, 2023.
[22] 杨斌. Early chatter detection in robotic milling under variable robot postures and cutting parameters. Mechanical Systems and Signal Processing, 186, 2022.
[23] 周长安. Development and testing of a wireless rotating triaxial vibration measuring tool holder system fo.... Measurement, 2020.
[24] 刘化强. Interfacial Characteristics and Mechanical Properties of CuSn15/HT250 Prepared via Additive Manuf.... MATERIALS, 2021.
[25] 杨斌. Towards metamaterial rods with amplitude-dependent band gaps: A superelastic alloy-based approach. Mechanical Systems and Signal Processing, 2022.
[26] 刘江伟. Effect of scanning speed on the microstructure and mechanical behavior of 316L stainless steel fa.... Materials and design, 2020.
[27] 赵艳哲. Study on chip formation characteristics in turning NiTi shape memory alloys. Journal of manufacturing processes, 787, 2020.
[28] 周长安. Vibration singularity analysis for milling tool condition monitoring. International Journal of Mechanical Sciences, 166, 2020.
[29] 周长安. An integrated wireless vibration sensing tool holder for milling tool condition monitoring with s.... Measurement: Journal of the International Measurement Confederation, 2021.
[30] 朱兆聚. Evolution of 3D chip morphology and phase transformation in dry drilling Ti6Al4V alloys. Journal of manufacturing processes, 531, 2018.
[31] 孙齐东. Compressive mechanical properties and energy absorption characteristics of SLM fabricated Ti6Al4V.... MECHANICS OF MATERIALS, 2022.
[32] 宋亚男. Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless ste.... MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 793, 2020.
[33] 朱兆聚. Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack. Journal of Materials Processing Technology, 270, 2018.
[34] Sui, Shaochun. Experimental investigation on the performance of novel double cone integrated tool in one-shot dr.... international Journal of Advanced Manufacturing Technology, 109, 523, 2020.
[35] 国凯. Investigation on the tool wear model and equivalent tool life in end milling titanium alloy Ti6Al.... 2018.
[36] 刘江伟. Compressive behavior and vibration-damping properties of porous Ti-6Al-4V alloy manufactured by l.... Journal of Manufacturing Processes, 1, 2021.
[37] 隋少春. Study on Improving Accuracy in Robotic Milling of Aluminum Alloy. 2018.
[38] 刘江伟. 金属基材料激光增材制造材料体系与发展现状. 激光杂志, 6, 2020.
[39] Saad Waqar. Effect of post-heat treatment cooling on microstructure and mechanical properties of selective la.... RAPID PROTOTYPING JOURNAL, 1739, 2020.
[40] 刘化强. Effect of Nb addition on the microstructure and mechanical properties of Inconel 718 fabricated b.... MATERIALS CHARACTERIZATION Journal, 2022.

total310 2/16

first previous next last Page

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[21] 武冲. Dual PID Adaptive Variable Impedance Constant Force Control for Grinding Robot. Applied Sciences-Basel, 13, 2023.

[22] 杨斌. Early chatter detection in robotic milling under variable robot postures and cutting parameters. Mechanical Systems and Signal Processing, 186, 2022.

[23] 周长安. Development and testing of a wireless rotating triaxial vibration measuring tool holder system fo.... Measurement, 2020.

[24] 刘化强. Interfacial Characteristics and Mechanical Properties of CuSn15/HT250 Prepared via Additive Manuf.... MATERIALS, 2021.

[25] 杨斌. Towards metamaterial rods with amplitude-dependent band gaps: A superelastic alloy-based approach. Mechanical Systems and Signal Processing, 2022.

[26] 刘江伟. Effect of scanning speed on the microstructure and mechanical behavior of 316L stainless steel fa.... Materials and design, 2020.

[27] 赵艳哲. Study on chip formation characteristics in turning NiTi shape memory alloys. Journal of manufacturing processes, 787, 2020.

[28] 周长安. Vibration singularity analysis for milling tool condition monitoring. International Journal of Mechanical Sciences, 166, 2020.

[29] 周长安. An integrated wireless vibration sensing tool holder for milling tool condition monitoring with s.... Measurement: Journal of the International Measurement Confederation, 2021.

[30] 朱兆聚. Evolution of 3D chip morphology and phase transformation in dry drilling Ti6Al4V alloys. Journal of manufacturing processes, 531, 2018.

[31] 孙齐东. Compressive mechanical properties and energy absorption characteristics of SLM fabricated Ti6Al4V.... MECHANICS OF MATERIALS, 2022.

[32] 宋亚男. Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless ste.... MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 793, 2020.

[33] 朱兆聚. Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack. Journal of Materials Processing Technology, 270, 2018.

[34] Sui, Shaochun. Experimental investigation on the performance of novel double cone integrated tool in one-shot dr.... international Journal of Advanced Manufacturing Technology, 109, 523, 2020.

[35] 国凯. Investigation on the tool wear model and equivalent tool life in end milling titanium alloy Ti6Al.... 2018.

[36] 刘江伟. Compressive behavior and vibration-damping properties of porous Ti-6Al-4V alloy manufactured by l.... Journal of Manufacturing Processes, 1, 2021.

[37] 隋少春. Study on Improving Accuracy in Robotic Milling of Aluminum Alloy. 2018.

[38] 刘江伟. 金属基材料激光增材制造材料体系与发展现状. 激光杂志, 6, 2020.

[39] Saad Waqar. Effect of post-heat treatment cooling on microstructure and mechanical properties of selective la.... RAPID PROTOTYPING JOURNAL, 1739, 2020.

[40] 刘化强. Effect of Nb addition on the microstructure and mechanical properties of Inconel 718 fabricated b.... MATERIALS CHARACTERIZATION Journal, 2022.