|
个人信息Personal Information
教授 博士生导师 硕士生导师
性别：男
毕业院校：山东大学
学历：博士研究生毕业
学位：工学博士学位
在职信息：在职
所在单位：机械工程学院
入职时间：2020-12-07
办公地点：山东省济南市经十路17923号山东大学千佛山校区
扫描关注
- [1] 于锡潼. Surface integrity analysis of Si3N4 under cryogenic assisted femtosecond laser ablation. Ceramics International, 2024.
- [2] 凌晨. Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys. Materials, 17, 2024.
- [3] 任小平. Study on the Formation Mechanism of Serrated Chips in the Cutting Process of Powder Metallurgy Superalloys Based on a Modified J-C Constitutive Relation Simulation Model. coatings, 14, 2024.
- [4] 赵金富. Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spra.... MICROMACHINES, 1263, 2023.
- [5] 李振民. Chatter suppression mechanism and parameters configuration of the spindle speed variation with piecewise characteristics. international Journal of Advanced Manufacturing Technology, 122, 3041-3055, 2022.
- [6] 李振民. Response prediction of cantilever plates via mode superposition method and combination method of beam functions. Mechanical Systems and Signal Processing, 200, 2023.
- [7] 李星. Gallium-based liquid metal hybridizing MoS<sub>2</sub> nanosheets with reversible rheological characteristics and enhanced lubrication properties. RSC ADVANCES, 13, 20365, 2023.
- [8] 李星. Gallium-based liquid metal hybridizing MoS2 nanosheets with reversible rheological characteristics and enhanced lubrication properties. RSC advances, 20365, 2023.
- [9] 赵金富. Cutting temperature measurement using an improved two-color infrared thermometer in turning Inconel 718 with whisker-reinforced ceramic tools. Ceramics International, 19002, 2018.
- [10] 赵金富. Tool coating effects on cutting temperature during metal cutting processes: Comprehensive review and future research directions. Mechanical Systems and Signal Processing, 2021.
- [11] 赵金富. Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools. 材料（materials）, 2018.
- [12] 赵金富. Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources. international Journal of Advanced Manufacturing Technology, 2021.
- [13] 赵金富. Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718. Tribology International, 2022.
- [14] 赵金富. A comprehensive review of generating, monitoring, evaluating, and controlling particle emissions during machining process. JOURNAL OF MANUFACTURING SYSTEMS, 2023.
- [15] 赵金富. Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools. JOURNAL OF ADVANCED RESEARCH, 2022.
- [16] 赵金富. PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in orthogonal cutting Inconel 718. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020.
- [17] 陈庆辉. Mechanism of laser-chemical process to remove of oxide layer and formation of periodic microstructures for drag reduction. SURFACES AND INTERFACES, 2022.
- [18] 唐一平. Fabrication of superhydrophobic stainless steel via hybrid femtosecond laser-chemical method with wear-resistance and anti-corrosion properties. Optics and Laser Technology, 2023.
- [19] 陈庆辉. Periodically oriented superhydrophobic microstructures prepared by laser ablation-chemical etching process for drag reduction. Applied surface science, 2023.
- [20] 王兵. Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during machining process. Journal of Manufacturing Processes, 123, 2023.