山东大学教师主页赵海森 Paper Publications Home

Zhao Hai Sen Professor

赵海森，国家海外高层次青年人才，山东大学计算机学院教授，博士生导师。主要研究方向为计算机图形学、数字几何设计，面向新一代智能制造需求的基础理论与方法开展研究。2018年12月获得山东大学工学博士学位，导师为陈宝权教授。2019年至2022年分别在美国华盛顿大学和奥地利科学技术研究所从事博士后研究，导师为Adriana Schulz 教授和Bernd Bickel教授。曾在ACM TOG、ACM SIGGRAPH/Asia、IEEE TVCG、IROS等顶级期刊或会议上发表论文十余篇，申请十余项国家发明专利和一项美国发明... More+

Recommended Ph.D.Supervisor Recommended MA Supervisor

Paper Publications

Home >> Scientific Research >> Paper Publications

[1] 钟凡超. As-Continuous-As-Possible Extrusion-Based Fabrication of Surface Models. ACM Transactions on Graphics, 2023.
[2] Zhong, Fanchao. As-Continuous-As-Possible Extrusion-Based Fabrication of Surface Models. ACM Transactions on Graphics, 42, 2023.
[3] 钟凡超. VASCO: Volume and Surface Co-Decomposition for Hybrid Manufacturing. ACM Transactions on Graphics, 42, 2023.
[4] 钟凡超. As-Continuous-As-Possible Extrusion-Based Fabrication of Surface Models. ACM Transaction on Graphics, 42, 2023.
[5] 赵海森. Co-Optimization of Design and Fabrication Plans for Carpentry. ACM Transactions on Graphics, 41, 2022.
[6] As-Continuous-As-Possible Extrusion Fabrication of Surface Models. ACM Transactions on Graphics, 2022.
[7] Co-Optimization of Design and Fabrication Plans for Carpentry. ACM Transactions on Graphics, 2022.
[8] Computational Design of Knit Templates. ACM Transactions on Graphics, 2022.
[9] Roadmap Towards Parallel Printing for Desktop 3D Printers. SFF Symp 2021, 2021.
[10] Robotic Jigsaws: Path Planning for Non-Holonomic Cutting Robots. IEEE IROS 2021, 2021.
[11] Fabrication-Aware Reverse Engineering for Carpentry. Computer Graphics Forum (SGP 2021), 2021.
[12] VDAC: Volume Decompose-and-Carve for Subtractive Manufacturing. ACM Transactions on Graphics, 2020.
[13] Strong 3D Printing by TPMS Injection. IEEE TVCG 2019, 2019.
[14] DSCarver: Decompose-and-Spiral-Carve for Subtractive Manufacturing. ACM Transactions on Graphics, 2018.
[15] Connected Fermat Spirals for Layered Fabrication. ACM Transactions on Graphics, 2016.
[16] Printed Perforated Lampshades for Continuous Projective Images. ACM Transactions on Graphics, 2016.
[17] Build-to-Last: Strength to Weight 3D Printed Objects. ACM Transactions on Graphics, 2014.

TOTAL 17 PIECE 1/1

FIRSTPREVIOUSNEXTLAST

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[1] 钟凡超. As-Continuous-As-Possible Extrusion-Based Fabrication of Surface Models. ACM Transactions on Graphics, 2023.

[2] Zhong, Fanchao. As-Continuous-As-Possible Extrusion-Based Fabrication of Surface Models. ACM Transactions on Graphics, 42, 2023.

[3] 钟凡超. VASCO: Volume and Surface Co-Decomposition for Hybrid Manufacturing. ACM Transactions on Graphics, 42, 2023.

[4] 钟凡超. As-Continuous-As-Possible Extrusion-Based Fabrication of Surface Models. ACM Transaction on Graphics, 42, 2023.

[5] 赵海森. Co-Optimization of Design and Fabrication Plans for Carpentry. ACM Transactions on Graphics, 41, 2022.

[6] As-Continuous-As-Possible Extrusion Fabrication of Surface Models. ACM Transactions on Graphics, 2022.

[7] Co-Optimization of Design and Fabrication Plans for Carpentry. ACM Transactions on Graphics, 2022.

[8] Computational Design of Knit Templates. ACM Transactions on Graphics, 2022.

[9] Roadmap Towards Parallel Printing for Desktop 3D Printers. SFF Symp 2021, 2021.

[10] Robotic Jigsaws: Path Planning for Non-Holonomic Cutting Robots. IEEE IROS 2021, 2021.

[11] Fabrication-Aware Reverse Engineering for Carpentry. Computer Graphics Forum (SGP 2021), 2021.

[12] VDAC: Volume Decompose-and-Carve for Subtractive Manufacturing. ACM Transactions on Graphics, 2020.

[13] Strong 3D Printing by TPMS Injection. IEEE TVCG 2019, 2019.

[14] DSCarver: Decompose-and-Spiral-Carve for Subtractive Manufacturing. ACM Transactions on Graphics, 2018.

[15] Connected Fermat Spirals for Layered Fabrication. ACM Transactions on Graphics, 2016.

[16] Printed Perforated Lampshades for Continuous Projective Images. ACM Transactions on Graphics, 2016.

[17] Build-to-Last: Strength to Weight 3D Printed Objects. ACM Transactions on Graphics, 2014.