|
个人信息Personal Information
教授 博士生导师 硕士生导师
性别：男
毕业院校：山东大学
学历：博士研究生毕业
学位：工学博士学位
在职信息：在职
所在单位：机械工程学院
入职时间：2020-12-07
办公地点：山东省济南市经十路17923号山东大学千佛山校区
扫描关注
- [41] 蔡玉奎. Formation mechanism of superhydrophobicity of stainless steel by laser-assisted decomposition of stearic acid and its corrosion resistance. Optics & Laser Technology, 2022.
- [42] 殷庆安. Machinability improvement of Inconel 718 through mechanochemical and heat transfer effects of coated surface-active thermal conductive mediums. JOURNAL OF ALLOYS AND COMPOUNDS , 876, 2021.
- [43] 赵建. Surface texture and friction property of Ti-6Al-4V processed by rotary ultrasonic rolling. international Journal of Advanced Manufacturing Technology, 115, 463, 2021.
- [44] 李国英. Effect of oxygen on Te infiltration into superalloy Inconel 718 at elevated temperature. Surface＆ Coatings Technology, 415, 2021.
- [45] 赵金福. Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources. international Journal of Advanced Manufacturing Technology, 2021.
- [46] 殷庆安. Machinability improvement of Inconel 718 through mechanochemical and heat transfer effects of coated surface-active thermal conductive mediums. JOURNAL OF ALLOYS AND COMPOUNDS , 876, 2021.
- [47] 李国英. Effect of element Te on alterations of microstructure and mechanical property of nickel-based superalloy Inconel 718 through alloy infiltration. Applied Surface Science, 544, 2021.
- [48] 柳月. Optimisation of Planning Parameters for Machining Blade Electrode Micro-Fillet with Scallop Height Modelling. MICROMACHINES, 12, 2021.
- [49] 王鑫. A cost-effective serpentine micromixer utilizing ellipse curve. ANALYTICA CHIMICA ACTA Journal, 1155, 2021.
- [50] 赵建. Analytical Prediction and Experimental Investigation of Burnishing Force in Rotary Ultrasonic Roller Burnishing Titanium Alloy Ti-6Al-4V. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 142, 2020.
- [51] 赵金富. PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in orthogonal cutting Inconel 718. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 163, 2020.
- [52] 梁晓亮. Multi-pattern failure modes and wear mechanisms of WC-Co tools in dry turning Ti-6Al-4V. Ceramics International, 46, 24512, 2020.
- [53] 殷庆安. Recent progress of machinability and surface integrity for mechanical machining Inconel 718: a review. international Journal of Advanced Manufacturing Technology, 109, 215, 2020.
- [54] 王鑫. Investigations into planar splitting and recombining micromixers with asymmetric structures. Journal of Micromechanics and Microengineering, 30, 2020.
- [55] 王兵. An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Alloy Inconel 718. International Journal of Precision Engineering and Manufacturing-Green Technology, 7, 35, 2020.
- [56] 王兵. Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V. Materials & Design, 2016.
- [57] 王兵. Cutting performance of solid ceramic end milling tools in machining hardened AISI H13 steel. International Journal of Refractory Metals and Hard Materials, 2016.
- [58] 王兵. Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining of 7050-T7451 aluminum alloy. Journal of Cleaner Production, 2016.
- [59] 王兵. Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T7451 aluminum alloy and Inconel 718 superalloy. Journal of Manufacturing Processes, 2017.
- [60] 王兵. Effect of scratching speed on phase transformations in high-speed scratching of monocrystalline silicon. Materials Science and Engineering: A, 2020.