张雷
教授
访问次数:
基本信息
  • 电子邮箱:
  • 入职时间:
    2014-08
  • 所在单位:
    控制科学与工程学院
  • 职务:
    教授,博士生导师
  • 性别:
  • 博士生导师
学科:
控制理论与控制工程;
控制科学与工程;
检测技术与自动化装置
曾获荣誉:

2023    中国自动化学会科技进步一等奖;
2023    山东省技术发明二等奖;
教师简介

教授,博士生导师,入选国家级高层次青年人才计划,主要从事先进传感器及检测技术研究,在光纤传感、光谱分析、结构健康监测等领域取得了创新性的成果,研制的传感器及检测系统应用于航天、航空和高速列车多种装备。近年来,主持国家级项目5项,省部级重点、企业委托等其他项目10项,主持项目经费2000万元,发表SCI学术论文80余篇,获得国家发明专利35项。


每年招收博士研究生1-2名,硕士研究生3~5名,欢迎自动化、仪器、光学、机械等相关学科背景的同学报考,优秀毕业生可推荐至国内外知名企业研究院工作或科研院所进修。

教育经历
  • 2005-09  — 2014-07
    天津大学
    精密仪器与光电子工程学院
    学士/硕士/博士
  • 2011-04  — 2014-03
    约翰开普勒林茨大学
    实验物理研究所
    联合培养博士
工作经历
  • 2014-08-至今
    山东大学
    助理研究员、副教授、教授
研究领域

1重大装备结构状态监测/测试技术研究与应用

近年来,我国在航天、航空、高速列车等高端装备技术领域取得快速发展,陆续成功建设了空间站、新一代飞船、大型运输机、先进战斗机、和谐号/复兴号高速列车等重大装备,已经成为我国高端装备技术的重要名片。但是,装备在服役过程中,由于长期承受交变载荷和恶劣环境的影响,其结构容易发生疲劳损伤、性能退化,甚至失效,如不能及时发现和应对容易造成重大安全事故。因此,对其进行状态监测和性能评估已经成为当前面临的紧迫问题。

面向上述需求,指导研究生开展了多型重大装备复杂结构状态监测/测试理论研究,提出了结构监测与评估新方法,自主研制了国际先进水平的大型监测系统(包括传感器网络、大容量硬件装置、在线控制与远程监控软件、智能分析算法等),应用于某型航天器、某型飞行器、复兴号高速列车和时速600公里高速磁浮列车等大型装备。

图片1.png

图片2.png 横梁演示动画.gif 机翼演示动画.gif

(2高分辨力/高速光谱智能分析技术与仪器研制

光学技术作为最重要的非接触式检测手段,正引领检测技术从接触测量向非接触测量深刻变革。其中,光谱分析技术凭借高分辨力、高速、无损等独特优势,已成为当前发展最快的测试技术前沿之一,在生命科学、临床医学、物质分析、薄膜检测、半导体制造、光纤传感等众多领域展现出不可替代的作用。然而,传统光谱分析方法在分辨力、采集速度与复杂信号智能解析方面存在明显局限,难以满足前沿探索和先进生产中对物质成分与微纳结构进行实时、精准、原位表征的迫切需求,如不能突破这些技术瓶颈,将严重制约相关领域的创新发展和产业升级。因此,研发高分辨力/高速光谱智能分析技术及自主可控仪器,已成为检测领域的重要发展方向。

面向上述需求,指导研究生开展了高分辨力/高速光谱智能分析理论与关键技术研究,提出了高分辨力光谱检测与分析新方法,突破了高灵敏度光信号采集与控制硬件技术,发展了多维智能光谱分析算法,自主研制了国际先进水平的多类型光谱分析仪器,主要包括:高速高分辨力近红外光谱分析仪、大范围扫描式光谱分析仪、差分反射光谱仪、显微拉曼光谱仪、显微可调谐激光吸收光谱仪等,应用于复杂物质成分分析、先进薄膜厚度精确测量、半导体制造过程监控、生命科学原位表征、以及分布式光纤传感等关键场景。

图片3.png

(3研究生培养与创新能力实践教学

鼓励和支持研究生基于所研课题发展创新实践能力,参与各级各类大学生创新能力实践竞赛。指导的研究生获中国国际“互联网+”大学生创新创业大赛金奖、山东省“互联网+”大学生创新创业大赛金奖、山东省大学生科技创新大赛一等奖、中国国际传感器创新创业大赛二等奖等。获评中国国际“互联网+”大学生创新创业大赛优秀创新创业导师、山东省大学生科技创新大赛金牌指导教师等。

图片4.png

 

 


科研成果
论文

1.  魏钧涛. Probabilistic diagnostic imaging method based on the difference between the arrival moments of ultrasonic guided wave signals.  Measurement,  116083, 2025. 

2.  滕飞宇. Damage localization in carbon fiber composite plate combining ultrasonic guided wave instantaneous energy characteristics and probabilistic imaging method.  Measurement,  2023. 

3.  滕飞宇. Improved-probabilistic imaging algorithm for separation problem of helical scattered path in pipeline ultrasonic guided wave inspection.  Measurement,  117474, 2025. 

4.  刘福政. Residual-optimized general linear chirplet transform: A method for time–frequency feature extraction.  Signal Processing,  234,  2025. 

5.  孙玲玉. Modified Lamb Wave Delay Factor-based Multiply-sum Probabilistic Diagnostic Imaging Algorithm of Composite Structures.  《IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT》,  72,  1-1, 2023. 

6.  叶呈龙. Novel cross-domain fault diagnosis method based on model-agnostic meta-learning embedded in adaptive threshold network.  Measurement,  113677, 2023. 

7.  韩同卓. Novel adaptive loss weighted transfer network for partial domain fault diagnosis.  ISA Transactions,  362, 2024. 

8.  刘繁. Novel short-term low-voltage load forecasting method based on residual stacking frequency attention network.  Electric Power Systems Research,  110534, 2024. 

9.  刘福政. Fault diagnosis of rolling bearing combining improved AWSGMD-CP and ACO-ELM model.  Measurement,  112531, 2023. 

10.  王金喜. Maximum average impulse energy ratio deconvolution and its application for periodic fault impulses enhancement of rolling bearing.  Advanced Engineering Informatics,  101721, 2022. 

11.  刘福政. Structural discrepancy and domain adversarial fusion network for cross-domain fault diagnosis.  ADVANCED ENGINEERING INFORMATICS,  102217, 2023. 

12.  刘繁荣. Novel short-term low-voltage load forecasting method based on residual stacking frequency attention network.  Electr. Power Syst. Res,  233,  2024. 

13.  叶呈龙. Novel cross-domain fault diagnosis method based on model-agnostic meta-learning embedded in adaptive threshold network.  Measurement,  222,  2023. 

14.  刘福政. Structural discrepancy and domain adversarial fusion network for cross-domain fault diagnosis.  ADVANCED ENGINEERING INFORMATICS,  58,  2023. 

15.  韩同卓. Novel adaptive loss weighted transfer network for partial domain fault diagnosis.  ISA Transactions,  2023. 

16.  程洋洋. Multi-type dynamic load identification algorithm in continuous system: A numerical and experimental study based on SSM-Newmark-β.  Applied Mathematical Modelling,  123,  810, 2023. 

17.  李尚恩. Strain/displacement field reconstruction and load identification of bracket arm structure of high-speed maglev train based on superposition conversion algorithm.  Measurement,  224,  2024. 

18.  孙玲玉. Modified Lamb Wave Delay Factor-Based Multiply–Sum Probabilistic Diagnostic Imaging Algorithm of Composite Structures.  《IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT》,  6004713, 2023. 

19.  吕珊珊. Linear annular path damage probability distribution based ultrasonic guided wave method for position imaging and tracking of multi-damage on plate-like carbon fiber composite structure.  Thin-Walled structures,  183,  2023. 

20.  滕飞宇. Ultrasonic Guided Wave Damage Localization in Hole-Structural Bearing Crossbeam Based on Improved RAPID Algorithm.  《IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT》,  71,  2022. 

21.  杨振发. Fast determination of oxides content in cement raw meal using NIR spectroscopy combined with synergy interval partial least square and different preprocessing methods.  Measurement,  2020. 

22.  王译那. Direct Observation of Monolayer MoS2 Prepared by CVD Using In-Situ Dierential Reflectance Spectroscopy.  Nanomaterials ,  2019. 

23.  赵津. Layout Optimization of FBG Sensor for Aluminum Alloy Beam Based on MOLA Multiobjective Optimization Algorithm.  IEEE Sensors Journal,  23,  14129, 2023. 

24.  王译那. In-situ variable reflectance spectra model of two-dimensional material prepared by CVD.  journal of crystal growth,  559,  2021. 

25.  刘福政. Fault diagnosis of rolling bearing combining improved AWSGMD-CP and ACO-ELM model.  Measurement,  209,  2023. 

26.  李昭华. Load Identification of High-Speed Train Crossbeams Using Neural Network Method: Simulated and Experimental Studies.  《IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT》,  2023. 

27.  赵津. Layout Optimization of FBG Sensor for Aluminum Alloy Beam Based on MOLA Multiobjective Optimization Algorithm.  IEEE Sensors Journal,  2023. 

28.  王淑贤. Load Identification of High-Speed Train Crossbeam Based on Bayesian Finite Element Model Updating and Load-Strain Linear Superposition Algorithm.  IEEE Sensors Journal,  23,  13489, 2023. 

29.  闫洁. Displacement field reconstruction technique for plate-like structures based on model superposition method.  Measurement and Control,  56,  654, 2023. 

30.  闫洁. Displacement field reconstruction technique for plate-like structures based on model superposition method.  Measurement and Control,  56,  654, 2023. 

31.  王译那. In-situ variable reflectance spectra model of two-dimensional material prepared by CVD.  晶体生长,  559,  2021. 

32.  王金喜. Maximum average impulse energy ratio deconvolution and its application for periodic fault impulses enhancement of rolling bearing.  ADVANCED ENGINEERING INFORMATICS,  53,  2022. 

33.  张艺蓝. Intelligent fault diagnosis of rolling bearing using the ensemble self-taught learning convolutional auto-encoders.  IET Science Measurement & Technology,  16,  130, 2022. 

34.  李昭华. Strain Field Reconstruction of High-Speed Train Crossbeam Based on FBG Sensing Network and Load-Strain Linear Superposition Algorithm.  IEEE Sensors Journal,  22,  3228, 2022. 

35.  程洋洋. Strain/Displacement Field Reconstruction and Load Identification of High-Speed Train Load-Bearing Structure Based on Linear Superposition Method.  《IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT》,  71,  2022. 

36.  曹弘毅. An ultrasonic signal processing method to improve defect depth estimation in composites based on empirical mode decomposition.  MEASUREMENT SCIENCE AND TECHNOLOGY,  32,  2021. 

37.  吕珊珊. Flexible calibration method of an FPP system based on a geometrical model and NLSM with fewer parameters (vol 58, pg A7, 2019).  Applied Optics,  58,  1298, 2019. 

38.  张法业. Intelligent Fault Diagnosis of Rolling Bearing Using the Ensemble Self-taught Learning Convolutional Auto-encoders.  IET Science Measurement & Technology,  2021,  1, 2021. 

39.  程洋洋. Strain field reconstruction of crossbeam structure based on load-strain linear superposition method.  SMART MATERIALS & STRUCTURES,  30,  2021. 

40.  杨振发. Fast determination of oxides content in cement raw meal using NIR spectroscopy combined with synergy interval partial least square and different preprocessing methods.  Measurement,  149,  2020. 

41.  杨振发. Rapid Determination of Oxides Content in Cement Raw Meal Based on Near Infrared Spectroscopy.  《分析化学》,  48,  275, 2020. 

42.  王译那. Coverage-dependent differential reflectance spectra of MoS2 atomic films synthesized by CVD using a large-diameter quartz tube.  SOLID STATE COMMUNICATIONS Journal,  318,  2020. 

43.  王译那. An In Situ Reflectance Spectroscopic Investigation to Monitor Two-Dimensional MoS2 Flakes on a Sapphire Substrate.  MATERIALS,  13,  2020. 

44.  杨振发. Fast determination of oxides content in cement raw meal using NIR-spectroscopy and backward interval PLS with genetic algorithm.  Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy,  223,  2019. 

45.  杨振发. Fast determination of oxide content in cement raw meal using NIR spectroscopy with the SPXY algorithm.  Analytical methods,  11,  3936, 2019. 

46.  张雷. Kinetic Barrier Against Standing Up of Pentacene Molecules Upon a Pentacene Monolayer.  Physica Status Solidi - Rapid Research Letters,  23,  2018. 

47.  苏晨辉. Damage Identification in Composites Based on Hilbert Energy Spectrum and Lamb Wave Tomography Algorithm.  IEEE Sensors Journal,  19,  11562, 2019. 

48.  苏晨辉. Improved Damage Localization and Quantification of CFRP Using Lamb Waves and Convolution Neural Network.  IEEE Sensors Journal,  19,  5784, 2019. 

49.  苏晨辉. Damage assessments of composite under the environment with strong noise based on synchrosqueezing wavelet transform and stack autoencoder algorithm.  Measurement,  156,  2020. 

50.  苏晨辉. Damage imaging for composite using Lamb wave based on minimum variance distortion-less response method.  Transactions of the Institute of Measurement and Control,  41,  4179, 2019. 

51.  马蒙源. High Precision Detection Method for Delamination Defects in Carbon Fiber Composite Laminates Based on Ultrasonic Technique and Signal Correlation Algorithm.  MATERIALS,  13,  2020. 

52.  苏晨辉. Damage Localization of Composites Based on Difference Signal and Lamb Wave Tomography.  MATERIALS,  13,  2020. 

53.  曹弘毅. Experimental Investigation of Impactor Diameter Effect on Low-Velocity Impact Response of CFRP Laminates in a Drop-Weight Impact Event.  MATERIALS,  13,  2020. 

54.  王译那. Direct Observation of Monolayer MoS2 Prepared by CVD Using In-Situ Differential Reflectance Spectroscopy.  9,  2019. 

55.  肖航. Compositional Analysis of Cement Raw Meal by Near-Infrared (NIR) Spectroscopy.  2004 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN & CYBERNETICS, VOLS 1-7,  52,  2931, 2019. 

56.  张雷  and 张雷. Pentacene/Cu(110) interface formation monitored by in situ optical spectroscopy.  PHYSICAL REVIEW B,  2014. 

57.  张雷  and 张雷. C60 adsorption on Cu(110) studied by optical spectroscopy.  Physica Status Solidi-Rapid Research Letters,  2014. 

58.  姜明顺 , 张雷 , 隋青美 , 张法业  and 张法业. Internal Combustion Engine Fault identification based on FBG Vibration Sensor and Support Vector Machines Algorithm.  Mathematical Problems in Engineering,  2019. 

59.  姜明顺 , 张雷  and 王译那. 关于脉冲激光辐照靶材作用机理的研究.  光电技术应用,  2018. 

60.  姜明顺 , 张雷 , 张法业 , 隋青美  and 李泽. 高精度超声波液位测量系统设计.  自动化仪表,  2018. 

61.  隋青美 , 刘茜 , 张雷 , 张法业  and 姜明顺. 反射式光纤测振系统理论分析与实验研究.  化工自动化及仪表,  2018. 

62.  张雷  and 张雷. Growth of pentacene on alpha-Al2O3(0001) studied by in situ optical spectroscopy.  PHYSICAL REVIEW MATERIALS,  1,  2017. 

63.  姜明顺 , 隋青美 , 贾磊 , 张雷  and 张雷. Pentacene crystal transition during the growth on SiO2 studied by in situ optical spectroscopy.  Synthetic Metals,  231,  65, 2017. 

64.  张雷  and 张雷. Optical and structural properties of the pentacene/quartz (0001) interface.  Physical review B,  2016. 

65.  张雷. Pentacene/Cu(110) interface formation monitored by in situ optical spectroscopy.  PHYSICAL REVIEW B,  2014. 

66.  张雷. C60 adsorption on Cu(110) studied by optical spectroscopy.  Physica Status Solidi-Rapid Research Letters,  2014. 

67.  张法业 , 姜明顺 , 隋青美 , 张雷 , 曹玉强  and 张法业. 基于可调谐DFB激光器的FBG加速度检测系统.  《光电子激光》,  2015. 

68.  张雷. Pentacene/Cu(110) interface formation monitored by in situ optical spectroscopy.  2014. 

69.  张雷. C60 adsorption on Cu(110) studied by optical spectroscopy.  2014. 

70.  张雷 , 曹玉强 , 张法业 , 姜明顺  and 隋青美. 基于可调谐DFB激光器的FBG加速度检测系统.  《光电子激光》,  2015. 

71.  隋青美 , 姜明顺 , 张雷  and 张法业. Internal Combustion Engine Fault identification based on FBG Vibration Sensor and Support Vector Machines Algorithm.  Mathematical Problems in Engineering,  2019. 

72.  曹玉强 , 张法业 , 姜明顺 , 隋青美  and 张雷. 基于柔性铰链结构的高灵敏度低频光纤光栅加速度传感器.  《红外与激光工程》,  46,  253, 2017. 

73.  姜明顺 , 张雷 , 张法业 , 隋青美  and 李泽. 高精度超声波液位测量系统设计.  自动化仪表,  2018. 

74.  姜明顺 , 隋青美 , 刘茜 , 张雷  and 张法业. 反射式光纤测振系统理论分析与实验研究.  化工自动化及仪表,  2018. 

75.  姜明顺 , 张雷  and 王译那. 关于脉冲激光辐照靶材作用机理的研究.  光电技术应用,  2018. 

76.  姜明顺 , 隋青美 , 张雷 , 曹玉强  and 张法业. 基于可调谐DFB激光器的FBG加速度检测系统.  《光电子激光》,  2015. 

77.  姜明顺 , 张法业 , 张雷 , 隋青美  and 魏钧涛. 光纤光栅传感弱信号探测电路的设计与优化.  《仪表技术与传感器》,  181, 2017. 

78.  张雷. Pentacene/Cu(110) interface formation monitored by in situ optical spectroscopy.  2014. 

79.  张雷. C60 adsorption on Cu(110) studied by optical spectroscopy.  2014. 

80.  张雷. Optical and structural properties of the pentacene/quartz (0001) interface.  Physical review B,  2016. 

81.  张雷. Growth of pentacene on alpha-Al2O3(0001) studied by in situ optical spectroscopy.  PHYSICAL REVIEW MATERIALS,  1,  2017. 

82.  姜明顺 , 隋青美 , 贾磊  and 张雷. Pentacene crystal transition during the growth on SiO2 studied by in situ optical spectroscopy.  Synthetic Metals,  231,  65, 2017. 

科研项目

1. 列车走行部系统状态感知与监测拓扑优化研究, 2023-09-01-2026-06-30

2. 光纤传感系统的开发与应用, 2024-11-15-2026-08-31

3. 国网山东超高压公司2024年特高压换流变网侧组部件振动状态评估与运检策略优化研究, 2024-05-17-2026-12-31

4. 计量仪器缺陷诊断系统开发项目, 2023-08-14-2025-11-13

5. 信息物理融合的载运装备综合验证平台集成技术研究, 2023-04-07-2028-03-31

6. 基于多法向光电阵列的GIS组合电器局部放电在线监测关键技术研究, 2023-05-05-2026-12-31

7. 国网连云港供电公司2022年基于计量采集模型优化的低压台区精益管理能力提升服务, 2022-07-07-2025-12-30

8. 轨道交通列车关键结构状态监测技术研究:课题1-青岛地铁1号线复合材料车体与转向架全局感知系统研发, 2021-08-15-2026-12-31

9. 国网江苏常州供电公司2022年分钟级数据的居民用户用能服务能力提升服务, 2022-06-08-2026-12-30

10. 轨道交通列车关键结构状态监测技术研究:课题2-青岛地铁1号线复材车体关键部件及部位感知系统研究, 2021-08-15-2026-12-31

11. 长大多腔复合材料拉挤工艺仿真验证, 2022-04-01-2026-08-31

12. 基于声纹感知和深度学习算法的变压器机械故障诊断技术研究, 2022-07-08-2024-12-31

13. 轨道车辆复合材料转向架构架载荷识别与寿命预测技术研究, 2022-09-07-2026-12-31

14. 基于光纤多参量感知的高速动车组关键结构状态监测与性能评估技术研究, 2020-01-05-2022-10-31

15. 轨道交通列车关键结构状态监测技术研究:课题3-新一代高速磁浮列车结构健康及电磁铁温度监测系统开发, 2021-08-15-2026-12-31

16. (包干项目)基于近红外光谱的水泥生料成分在线检测关键技术研究, 2021-12-23-2024-12-31

17. 国网江苏南京2021基于多元高频数据的台区可开放容量及精细负荷资源分析提升服务, 2021-09-30-2023-12-31

18. 国网江苏泰州供电公司基于用采大数据的社区智慧管理研发服务, 2021-08-25-2025-12-31

19. 高速磁浮列车关键部件光纤光栅动应力测试系统开发, 2020-09-20-2021-12-31

20. 基于光纤珐珀传感器的碳纤维复合材料结构损伤超声检测技术研究, 2020-09-18-2024-12-31

21. 高速列车关键结构健康监测与安全评估技术研究, 2019-11-01-2022-04-30

22. 时速 600 公里高速磁浮列车轻量化车体技术研究, 2019-03-20-2021-12-31

23. 工业装备智慧化健康管理协同创新中心, 2020-01-01-2022-12-31

24. 工业装备智慧化健康管理协同创新中心, 2020-01-01-2022-12-31

25. 冷链物流废热制冷系统双层预测控制研究, 2016-10-29-2019-06-30

26. 用户侧多能源数据应用商业模式和推广前景, 2018-11-01-2020-12-31

27. 基于显微差分反射光谱技术的有机薄膜制备在线检测方法研究, 2015-08-17-2018-12-31

版权所有   ©山东大学 地址:中国山东省济南市山大南路27号 邮编:250100 
查号台:(86)-0531-88395114
值班电话:(86)-0531-88364731 建设维护:山东大学信息化工作办公室